# Copyright 2018 The TensorFlow Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ==============================================================================
# pylint: disable=invalid-name
"""MobileNet v2 models for Keras.

MobileNetV2 is a general architecture and can be used for multiple use cases.
Depending on the use case, it can use different input layer size and
different width factors. This allows different width models to reduce
the number of multiply-adds and thereby
reduce inference cost on mobile devices.

MobileNetV2 is very similar to the original MobileNet,
except that it uses inverted residual blocks with
bottlenecking features. It has a drastically lower
parameter count than the original MobileNet.
MobileNets support any input size greater
than 32 x 32, with larger image sizes
offering better performance.

The number of parameters and number of multiply-adds
can be modified by using the `alpha` parameter,
which increases/decreases the number of filters in each layer.
By altering the image size and `alpha` parameter,
all 22 models from the paper can be built, with ImageNet weights provided.

The paper demonstrates the performance of MobileNets using `alpha` values of
1.0 (also called 100 % MobileNet), 0.35, 0.5, 0.75, 1.0, 1.3, and 1.4
For each of these `alpha` values, weights for 5 different input image sizes
are provided (224, 192, 160, 128, and 96).

The following table describes the performance of
MobileNet on various input sizes:
------------------------------------------------------------------------
MACs stands for Multiply Adds
 Classification Checkpoint|MACs (M)|Parameters (M)|Top 1 Accuracy|Top 5 Accuracy
--------------------------|------------|---------------|---------|----|---------
| [mobilenet_v2_1.4_224]  | 582 | 6.06 |          75.0 | 92.5 |
| [mobilenet_v2_1.3_224]  | 509 | 5.34 |          74.4 | 92.1 |
| [mobilenet_v2_1.0_224]  | 300 | 3.47 |          71.8 | 91.0 |
| [mobilenet_v2_1.0_192]  | 221 | 3.47 |          70.7 | 90.1 |
| [mobilenet_v2_1.0_160]  | 154 | 3.47 |          68.8 | 89.0 |
| [mobilenet_v2_1.0_128]  | 99  | 3.47 |          65.3 | 86.9 |
| [mobilenet_v2_1.0_96]   | 56  | 3.47 |          60.3 | 83.2 |
| [mobilenet_v2_0.75_224] | 209 | 2.61 |          69.8 | 89.6 |
| [mobilenet_v2_0.75_192] | 153 | 2.61 |          68.7 | 88.9 |
| [mobilenet_v2_0.75_160] | 107 | 2.61 |          66.4 | 87.3 |
| [mobilenet_v2_0.75_128] | 69  | 2.61 |          63.2 | 85.3 |
| [mobilenet_v2_0.75_96]  | 39  | 2.61 |          58.8 | 81.6 |
| [mobilenet_v2_0.5_224]  | 97  | 1.95 |          65.4 | 86.4 |
| [mobilenet_v2_0.5_192]  | 71  | 1.95 |          63.9 | 85.4 |
| [mobilenet_v2_0.5_160]  | 50  | 1.95 |          61.0 | 83.2 |
| [mobilenet_v2_0.5_128]  | 32  | 1.95 |          57.7 | 80.8 |
| [mobilenet_v2_0.5_96]   | 18  | 1.95 |          51.2 | 75.8 |
| [mobilenet_v2_0.35_224] | 59  | 1.66 |          60.3 | 82.9 |
| [mobilenet_v2_0.35_192] | 43  | 1.66 |          58.2 | 81.2 |
| [mobilenet_v2_0.35_160] | 30  | 1.66 |          55.7 | 79.1 |
| [mobilenet_v2_0.35_128] | 20  | 1.66 |          50.8 | 75.0 |
| [mobilenet_v2_0.35_96]  | 11  | 1.66 |          45.5 | 70.4 |

  Reference:
  - [MobileNetV2: Inverted Residuals and Linear Bottlenecks](
      https://arxiv.org/abs/1801.04381) (CVPR 2018)
"""
from __future__ import absolute_import
from __future__ import division
from __future__ import print_function

from tensorflow.python.keras import backend
from tensorflow.python.keras.applications import imagenet_utils
from tensorflow.python.keras.engine import training
from tensorflow.python.keras.layers import VersionAwareLayers
from tensorflow.python.keras.utils import data_utils
from tensorflow.python.keras.utils import layer_utils
from tensorflow.python.lib.io import file_io
from tensorflow.python.platform import tf_logging as logging
from tensorflow.python.util.tf_export import keras_export

BASE_WEIGHT_PATH = ('https://storage.googleapis.com/tensorflow/'
                    'keras-applications/mobilenet_v2/')
layers = None


@keras_export('keras.applications.mobilenet_v2.MobileNetV2',
              'keras.applications.MobileNetV2')
def MobileNetV2(input_shape=None,
                alpha=1.0,
                include_top=True,
                weights='imagenet',
                input_tensor=None,
                pooling=None,
                classes=1000,
                classifier_activation='softmax',
                **kwargs):
  """Instantiates the MobileNetV2 architecture.

  Reference:
  - [MobileNetV2: Inverted Residuals and Linear Bottlenecks](
      https://arxiv.org/abs/1801.04381) (CVPR 2018)

  Optionally loads weights pre-trained on ImageNet.

  Note: each Keras Application expects a specific kind of input preprocessing.
  For MobileNetV2, call `tf.keras.applications.mobilenet_v2.preprocess_input`
  on your inputs before passing them to the model.

  Arguments:
    input_shape: Optional shape tuple, to be specified if you would
      like to use a model with an input image resolution that is not
      (224, 224, 3).
      It should have exactly 3 inputs channels (224, 224, 3).
      You can also omit this option if you would like
      to infer input_shape from an input_tensor.
      If you choose to include both input_tensor and input_shape then
      input_shape will be used if they match, if the shapes
      do not match then we will throw an error.
      E.g. `(160, 160, 3)` would be one valid value.
    alpha: Float between 0 and 1. controls the width of the network.
      This is known as the width multiplier in the MobileNetV2 paper,
      but the name is kept for consistency with `applications.MobileNetV1`
      model in Keras.
      - If `alpha` < 1.0, proportionally decreases the number
          of filters in each layer.
      - If `alpha` > 1.0, proportionally increases the number
          of filters in each layer.
      - If `alpha` = 1, default number of filters from the paper
          are used at each layer.
    include_top: Boolean, whether to include the fully-connected
      layer at the top of the network. Defaults to `True`.
    weights: String, one of `None` (random initialization),
      'imagenet' (pre-training on ImageNet),
      or the path to the weights file to be loaded.
    input_tensor: Optional Keras tensor (i.e. output of
      `layers.Input()`)
      to use as image input for the model.
    pooling: String, optional pooling mode for feature extraction
      when `include_top` is `False`.
      - `None` means that the output of the model
          will be the 4D tensor output of the
          last convolutional block.
      - `avg` means that global average pooling
          will be applied to the output of the
          last convolutional block, and thus
          the output of the model will be a
          2D tensor.
      - `max` means that global max pooling will
          be applied.
    classes: Integer, optional number of classes to classify images
      into, only to be specified if `include_top` is True, and
      if no `weights` argument is specified.
    classifier_activation: A `str` or callable. The activation function to use
      on the "top" layer. Ignored unless `include_top=True`. Set
      `classifier_activation=None` to return the logits of the "top" layer.
    **kwargs: For backwards compatibility only.

  Returns:
    A `keras.Model` instance.

  Raises:
    ValueError: in case of invalid argument for `weights`,
      or invalid input shape or invalid alpha, rows when
      weights='imagenet'
    ValueError: if `classifier_activation` is not `softmax` or `None` when
      using a pretrained top layer.
  """
  global layers
  if 'layers' in kwargs:
    layers = kwargs.pop('layers')
  else:
    layers = VersionAwareLayers()
  if kwargs:
    raise ValueError('Unknown argument(s): %s' % (kwargs,))
  if not (weights in {'imagenet', None} or file_io.file_exists_v2(weights)):
    raise ValueError('The `weights` argument should be either '
                     '`None` (random initialization), `imagenet` '
                     '(pre-training on ImageNet), '
                     'or the path to the weights file to be loaded.')

  if weights == 'imagenet' and include_top and classes != 1000:
    raise ValueError('If using `weights` as `"imagenet"` with `include_top` '
                     'as true, `classes` should be 1000')

  # Determine proper input shape and default size.
  # If both input_shape and input_tensor are used, they should match
  if input_shape is not None and input_tensor is not None:
    try:
      is_input_t_tensor = backend.is_keras_tensor(input_tensor)
    except ValueError:
      try:
        is_input_t_tensor = backend.is_keras_tensor(
            layer_utils.get_source_inputs(input_tensor))
      except ValueError:
        raise ValueError('input_tensor: ', input_tensor,
                         'is not type input_tensor')
    if is_input_t_tensor:
      if backend.image_data_format == 'channels_first':
        if backend.int_shape(input_tensor)[1] != input_shape[1]:
          raise ValueError('input_shape: ', input_shape, 'and input_tensor: ',
                           input_tensor,
                           'do not meet the same shape requirements')
      else:
        if backend.int_shape(input_tensor)[2] != input_shape[1]:
          raise ValueError('input_shape: ', input_shape, 'and input_tensor: ',
                           input_tensor,
                           'do not meet the same shape requirements')
    else:
      raise ValueError('input_tensor specified: ', input_tensor,
                       'is not a keras tensor')

  # If input_shape is None, infer shape from input_tensor
  if input_shape is None and input_tensor is not None:

    try:
      backend.is_keras_tensor(input_tensor)
    except ValueError:
      raise ValueError('input_tensor: ', input_tensor, 'is type: ',
                       type(input_tensor), 'which is not a valid type')

    if input_shape is None and not backend.is_keras_tensor(input_tensor):
      default_size = 224
    elif input_shape is None and backend.is_keras_tensor(input_tensor):
      if backend.image_data_format() == 'channels_first':
        rows = backend.int_shape(input_tensor)[2]
        cols = backend.int_shape(input_tensor)[3]
      else:
        rows = backend.int_shape(input_tensor)[1]
        cols = backend.int_shape(input_tensor)[2]

      if rows == cols and rows in [96, 128, 160, 192, 224]:
        default_size = rows
      else:
        default_size = 224

  # If input_shape is None and no input_tensor
  elif input_shape is None:
    default_size = 224

  # If input_shape is not None, assume default size
  else:
    if backend.image_data_format() == 'channels_first':
      rows = input_shape[1]
      cols = input_shape[2]
    else:
      rows = input_shape[0]
      cols = input_shape[1]

    if rows == cols and rows in [96, 128, 160, 192, 224]:
      default_size = rows
    else:
      default_size = 224

  input_shape = imagenet_utils.obtain_input_shape(
      input_shape,
      default_size=default_size,
      min_size=32,
      data_format=backend.image_data_format(),
      require_flatten=include_top,
      weights=weights)

  if backend.image_data_format() == 'channels_last':
    row_axis, col_axis = (0, 1)
  else:
    row_axis, col_axis = (1, 2)
  rows = input_shape[row_axis]
  cols = input_shape[col_axis]

  if weights == 'imagenet':
    if alpha not in [0.35, 0.50, 0.75, 1.0, 1.3, 1.4]:
      raise ValueError('If imagenet weights are being loaded, '
                       'alpha can be one of `0.35`, `0.50`, `0.75`, '
                       '`1.0`, `1.3` or `1.4` only.')

    if rows != cols or rows not in [96, 128, 160, 192, 224]:
      rows = 224
      logging.warning('`input_shape` is undefined or non-square, '
                      'or `rows` is not in [96, 128, 160, 192, 224].'
                      ' Weights for input shape (224, 224) will be'
                      ' loaded as the default.')

  if input_tensor is None:
    img_input = layers.Input(shape=input_shape)
  else:
    if not backend.is_keras_tensor(input_tensor):
      img_input = layers.Input(tensor=input_tensor, shape=input_shape)
    else:
      img_input = input_tensor

  channel_axis = 1 if backend.image_data_format() == 'channels_first' else -1

  first_block_filters = _make_divisible(32 * alpha, 8)
  x = layers.Conv2D(
      first_block_filters,
      kernel_size=3,
      strides=(2, 2),
      padding='same',
      use_bias=False,
      name='Conv1')(img_input)
  x = layers.BatchNormalization(
      axis=channel_axis, epsilon=1e-3, momentum=0.999, name='bn_Conv1')(
          x)
  x = layers.ReLU(6., name='Conv1_relu')(x)

  x = _inverted_res_block(
      x, filters=16, alpha=alpha, stride=1, expansion=1, block_id=0)

  x = _inverted_res_block(
      x, filters=24, alpha=alpha, stride=2, expansion=6, block_id=1)
  x = _inverted_res_block(
      x, filters=24, alpha=alpha, stride=1, expansion=6, block_id=2)

  x = _inverted_res_block(
      x, filters=32, alpha=alpha, stride=2, expansion=6, block_id=3)
  x = _inverted_res_block(
      x, filters=32, alpha=alpha, stride=1, expansion=6, block_id=4)
  x = _inverted_res_block(
      x, filters=32, alpha=alpha, stride=1, expansion=6, block_id=5)

  x = _inverted_res_block(
      x, filters=64, alpha=alpha, stride=2, expansion=6, block_id=6)
  x = _inverted_res_block(
      x, filters=64, alpha=alpha, stride=1, expansion=6, block_id=7)
  x = _inverted_res_block(
      x, filters=64, alpha=alpha, stride=1, expansion=6, block_id=8)
  x = _inverted_res_block(
      x, filters=64, alpha=alpha, stride=1, expansion=6, block_id=9)

  x = _inverted_res_block(
      x, filters=96, alpha=alpha, stride=1, expansion=6, block_id=10)
  x = _inverted_res_block(
      x, filters=96, alpha=alpha, stride=1, expansion=6, block_id=11)
  x = _inverted_res_block(
      x, filters=96, alpha=alpha, stride=1, expansion=6, block_id=12)

  x = _inverted_res_block(
      x, filters=160, alpha=alpha, stride=2, expansion=6, block_id=13)
  x = _inverted_res_block(
      x, filters=160, alpha=alpha, stride=1, expansion=6, block_id=14)
  x = _inverted_res_block(
      x, filters=160, alpha=alpha, stride=1, expansion=6, block_id=15)

  x = _inverted_res_block(
      x, filters=320, alpha=alpha, stride=1, expansion=6, block_id=16)

  # no alpha applied to last conv as stated in the paper:
  # if the width multiplier is greater than 1 we
  # increase the number of output channels
  if alpha > 1.0:
    last_block_filters = _make_divisible(1280 * alpha, 8)
  else:
    last_block_filters = 1280

  x = layers.Conv2D(
      last_block_filters, kernel_size=1, use_bias=False, name='Conv_1')(
          x)
  x = layers.BatchNormalization(
      axis=channel_axis, epsilon=1e-3, momentum=0.999, name='Conv_1_bn')(
          x)
  x = layers.ReLU(6., name='out_relu')(x)

  if include_top:
    x = layers.GlobalAveragePooling2D()(x)
    imagenet_utils.validate_activation(classifier_activation, weights)
    x = layers.Dense(classes, activation=classifier_activation,
                     name='predictions')(x)

  else:
    if pooling == 'avg':
      x = layers.GlobalAveragePooling2D()(x)
    elif pooling == 'max':
      x = layers.GlobalMaxPooling2D()(x)

  # Ensure that the model takes into account
  # any potential predecessors of `input_tensor`.
  if input_tensor is not None:
    inputs = layer_utils.get_source_inputs(input_tensor)
  else:
    inputs = img_input

  # Create model.
  model = training.Model(inputs, x, name='mobilenetv2_%0.2f_%s' % (alpha, rows))

  # Load weights.
  if weights == 'imagenet':
    if include_top:
      model_name = ('mobilenet_v2_weights_tf_dim_ordering_tf_kernels_' +
                    str(alpha) + '_' + str(rows) + '.h5')
      weight_path = BASE_WEIGHT_PATH + model_name
      weights_path = data_utils.get_file(
          model_name, weight_path, cache_subdir='models')
    else:
      model_name = ('mobilenet_v2_weights_tf_dim_ordering_tf_kernels_' +
                    str(alpha) + '_' + str(rows) + '_no_top' + '.h5')
      weight_path = BASE_WEIGHT_PATH + model_name
      weights_path = data_utils.get_file(
          model_name, weight_path, cache_subdir='models')
    model.load_weights(weights_path)
  elif weights is not None:
    model.load_weights(weights)

  return model


def _inverted_res_block(inputs, expansion, stride, alpha, filters, block_id):
  """Inverted ResNet block."""
  channel_axis = 1 if backend.image_data_format() == 'channels_first' else -1

  in_channels = backend.int_shape(inputs)[channel_axis]
  pointwise_conv_filters = int(filters * alpha)
  pointwise_filters = _make_divisible(pointwise_conv_filters, 8)
  x = inputs
  prefix = 'block_{}_'.format(block_id)

  if block_id:
    # Expand
    x = layers.Conv2D(
        expansion * in_channels,
        kernel_size=1,
        padding='same',
        use_bias=False,
        activation=None,
        name=prefix + 'expand')(
            x)
    x = layers.BatchNormalization(
        axis=channel_axis,
        epsilon=1e-3,
        momentum=0.999,
        name=prefix + 'expand_BN')(
            x)
    x = layers.ReLU(6., name=prefix + 'expand_relu')(x)
  else:
    prefix = 'expanded_conv_'

  # Depthwise
  if stride == 2:
    x = layers.ZeroPadding2D(
        padding=imagenet_utils.correct_pad(x, 3),
        name=prefix + 'pad')(x)
  x = layers.DepthwiseConv2D(
      kernel_size=3,
      strides=stride,
      activation=None,
      use_bias=False,
      padding='same' if stride == 1 else 'valid',
      name=prefix + 'depthwise')(
          x)
  x = layers.BatchNormalization(
      axis=channel_axis,
      epsilon=1e-3,
      momentum=0.999,
      name=prefix + 'depthwise_BN')(
          x)

  x = layers.ReLU(6., name=prefix + 'depthwise_relu')(x)

  # Project
  x = layers.Conv2D(
      pointwise_filters,
      kernel_size=1,
      padding='same',
      use_bias=False,
      activation=None,
      name=prefix + 'project')(
          x)
  x = layers.BatchNormalization(
      axis=channel_axis,
      epsilon=1e-3,
      momentum=0.999,
      name=prefix + 'project_BN')(
          x)

  if in_channels == pointwise_filters and stride == 1:
    return layers.Add(name=prefix + 'add')([inputs, x])
  return x


def _make_divisible(v, divisor, min_value=None):
  if min_value is None:
    min_value = divisor
  new_v = max(min_value, int(v + divisor / 2) // divisor * divisor)
  # Make sure that round down does not go down by more than 10%.
  if new_v < 0.9 * v:
    new_v += divisor
  return new_v


@keras_export('keras.applications.mobilenet_v2.preprocess_input')
def preprocess_input(x, data_format=None):
  return imagenet_utils.preprocess_input(x, data_format=data_format, mode='tf')


@keras_export('keras.applications.mobilenet_v2.decode_predictions')
def decode_predictions(preds, top=5):
  return imagenet_utils.decode_predictions(preds, top=top)


preprocess_input.__doc__ = imagenet_utils.PREPROCESS_INPUT_DOC.format(
    mode='',
    ret=imagenet_utils.PREPROCESS_INPUT_RET_DOC_TF,
    error=imagenet_utils.PREPROCESS_INPUT_ERROR_DOC)
decode_predictions.__doc__ = imagenet_utils.decode_predictions.__doc__