/* * Copyright (c) 2007-2012 Douglas Gilbert. * All rights reserved. * Use of this source code is governed by a BSD-style * license that can be found in the BSD_LICENSE file. */ #include #include "sg_lib.h" #include "sg_lib_data.h" #ifdef HAVE_CONFIG_H #include "config.h" #endif const char * sg_lib_version_str = "1.79 20120920"; /* spc4r36, sbc3r32 */ #ifdef SG_SCSI_STRINGS struct sg_lib_value_name_t sg_lib_normal_opcodes[] = { {0, 0, "Test Unit Ready"}, {0x1, 0, "Rezero Unit"}, {0x1, PDT_TAPE, "Rewind"}, {0x3, 0, "Request Sense"}, {0x4, 0, "Format Unit"}, {0x4, PDT_TAPE, "Format medium"}, {0x4, PDT_PRINTER, "Format"}, {0x5, 0, "Read Block Limits"}, {0x7, 0, "Reassign Blocks"}, {0x7, PDT_MCHANGER, "Initialize element status"}, {0x8, 0, "Read(6)"}, /* obsolete in sbc3r30 */ {0x8, PDT_PROCESSOR, "Receive"}, {0xa, 0, "Write(6)"}, /* obsolete in sbc3r30 */ {0xa, PDT_PRINTER, "Print"}, {0xa, PDT_PROCESSOR, "Send"}, {0xb, 0, "Seek(6)"}, {0xb, PDT_TAPE, "Set capacity"}, {0xb, PDT_PRINTER, "Slew and print"}, {0xf, 0, "Read reverse(6)"}, {0x10, 0, "Write filemarks(6)"}, {0x10, PDT_PRINTER, "Synchronize buffer"}, {0x11, 0, "Space(6)"}, {0x12, 0, "Inquiry"}, {0x13, 0, "Verify(6)"}, /* SSC */ {0x14, 0, "Recover buffered data"}, {0x15, 0, "Mode select(6)"}, /* SBC-3 r31 recommends Mode select(10) */ {0x16, 0, "Reserve(6)"}, /* obsolete in SPC-4 r11 */ {0x16, PDT_MCHANGER, "Reserve element(6)"}, {0x17, 0, "Release(6)"}, /* obsolete in SPC-4 r11 */ {0x17, PDT_MCHANGER, "Release element(6)"}, {0x18, 0, "Copy"}, /* obsolete in SPC-4 r11 */ {0x19, 0, "Erase(6)"}, {0x1a, 0, "Mode sense(6)"}, /* SBC-3 r31 recommends Mode sense(10) */ {0x1b, 0, "Start stop unit"}, {0x1b, PDT_TAPE, "Load unload"}, {0x1b, PDT_ADC, "Load unload"}, {0x1b, PDT_PRINTER, "Stop print"}, {0x1c, 0, "Receive diagnostic results"}, {0x1d, 0, "Send diagnostic"}, {0x1e, 0, "Prevent allow medium removal"}, {0x23, 0, "Read Format capacities"}, {0x24, 0, "Set window"}, {0x25, 0, "Read capacity(10)"}, /* SBC-3 r31 recommends Read capacity(16) */ {0x25, PDT_OCRW, "Read card capacity"}, {0x28, 0, "Read(10)"}, /* SBC-3 r31 recommends Read(16) */ {0x29, 0, "Read generation"}, {0x2a, 0, "Write(10)"}, /* SBC-3 r31 recommends Write(16) */ {0x2b, 0, "Seek(10)"}, {0x2b, PDT_TAPE, "Locate(10)"}, {0x2b, PDT_MCHANGER, "Position to element"}, {0x2c, 0, "Erase(10)"}, {0x2d, 0, "Read updated block"}, {0x2e, 0, "Write and verify(10)"}, /* SBC-3 r31 recommends Write and verify(16) */ {0x2f, 0, "Verify(10)"}, /* SBC-3 r31 recommends Verify(16) */ {0x30, 0, "Search data high(10)"}, {0x31, 0, "Search data equal(10)"}, {0x32, 0, "Search data low(10)"}, {0x33, 0, "Set limits(10)"}, {0x34, 0, "Pre-fetch(10)"}, /* SBC-3 r31 recommends Pre-fetch(16) */ {0x34, PDT_TAPE, "Read position"}, {0x35, 0, "Synchronize cache(10)"}, /* SBC-3 r31 recommends Synchronize cache(16) */ {0x36, 0, "Lock unlock cache(10)"}, {0x37, 0, "Read defect data(10)"}, /* SBC-3 r31 recommends Read defect data(12) */ {0x37, PDT_MCHANGER, "Initialize element status with range"}, {0x38, 0, "Medium scan"}, {0x39, 0, "Compare"}, /* obsolete in SPC-4 r11 */ {0x3a, 0, "Copy and verify"}, /* obsolete in SPC-4 r11 */ {0x3b, 0, "Write buffer"}, {0x3c, 0, "Read buffer"}, {0x3d, 0, "Update block"}, {0x3e, 0, "Read long(10)"}, /* SBC-3 r31 recommends Read long(16) */ {0x3f, 0, "Write long(10)"}, /* SBC-3 r31 recommends Write long(16) */ {0x40, 0, "Change definition"}, /* obsolete in SPC-4 r11 */ {0x41, 0, "Write same(10)"}, /* SBC-3 r31 recommends Write same(16) */ {0x42, 0, "Unmap"}, /* added SPC-4 rev 18 */ {0x42, PDT_MMC, "Read sub-channel"}, {0x43, PDT_MMC, "Read TOC/PMA/ATIP"}, {0x44, 0, "Report density support"}, {0x45, PDT_MMC, "Play audio(10)"}, {0x46, PDT_MMC, "Get configuration"}, {0x47, PDT_MMC, "Play audio msf"}, {0x48, 0, "Sanitize"}, {0x4a, PDT_MMC, "Get event status notification"}, {0x4b, PDT_MMC, "Pause/resume"}, {0x4c, 0, "Log select"}, {0x4d, 0, "Log sense"}, {0x4e, 0, "Stop play/scan"}, {0x50, 0, "Xdwrite(10)"}, /* obsolete in SBC-3 r31 */ {0x51, 0, "Xpwrite(10)"}, {0x51, PDT_MMC, "Read disk information"}, {0x52, 0, "Xdread(10)"}, /* obsolete in SBC-3 r31 */ {0x52, PDT_MMC, "Read track information"}, {0x53, 0, "Reserve track"}, {0x54, 0, "Send OPC information"}, {0x55, 0, "Mode select(10)"}, {0x56, 0, "Reserve(10)"}, /* obsolete in SPC-4 r11 */ {0x56, PDT_MCHANGER, "Reserve element(10)"}, {0x57, 0, "Release(10)"}, /* obsolete in SPC-4 r11 */ {0x57, PDT_MCHANGER, "Release element(10)"}, {0x58, 0, "Repair track"}, {0x5a, 0, "Mode sense(10)"}, {0x5b, 0, "Close track/session"}, {0x5c, 0, "Read buffer capacity"}, {0x5d, 0, "Send cue sheet"}, {0x5e, 0, "Persistent reserve in"}, {0x5f, 0, "Persistent reserve out"}, {0x7e, 0, "Extended cdb (XCBD)"}, /* added in SPC-4 r12 */ {0x80, 0, "Xdwrite extended(16)"}, {0x80, PDT_TAPE, "Write filemarks(16)"}, {0x81, 0, "Rebuild(16)"}, {0x81, PDT_TAPE, "Read reverse(16)"}, {0x82, 0, "Regenerate(16)"}, {0x83, 0, "Extended copy"}, {0x84, 0, "Receive copy results"}, {0x85, 0, "ATA command pass through(16)"}, /* was 0x98 in spc3 rev21c */ {0x86, 0, "Access control in"}, {0x87, 0, "Access control out"}, {0x88, 0, "Read(16)"}, {0x89, 0, "Compare and write"}, {0x8a, 0, "Write(16)"}, {0x8b, 0, "Orwrite(16)"}, {0x8c, 0, "Read attribute"}, {0x8d, 0, "Write attribute"}, {0x8e, 0, "Write and verify(16)"}, {0x8f, 0, "Verify(16)"}, {0x90, 0, "Pre-fetch(16)"}, {0x91, 0, "Synchronize cache(16)"}, {0x91, PDT_TAPE, "Space(16)"}, {0x92, 0, "Lock unlock cache(16)"}, {0x92, PDT_TAPE, "Locate(16)"}, {0x93, 0, "Write same(16)"}, {0x93, PDT_TAPE, "Erase(16)"}, {0x9d, 0, "Service action bidirectional"}, /* added spc4r35 */ {0x9e, 0, "Service action in(16)"}, {0x9f, 0, "Service action out(16)"}, {0xa0, 0, "Report luns"}, {0xa1, 0, "ATA command pass through(12)"}, {0xa1, PDT_MMC, "Blank"}, {0xa2, 0, "Security protocol in"}, {0xa3, 0, "Maintenance in"}, {0xa3, PDT_MMC, "Send key"}, {0xa4, 0, "Maintenance out"}, {0xa4, PDT_MMC, "Report key"}, {0xa5, 0, "Move medium"}, {0xa5, PDT_MMC, "Play audio(12)"}, {0xa6, 0, "Exchange medium"}, {0xa6, PDT_MMC, "Load/unload medium"}, {0xa7, 0, "Move medium attached"}, {0xa7, PDT_MMC, "Set read ahead"}, {0xa8, 0, "Read(12)"}, /* SBC-3 r31 recommends Read(16) */ {0xa9, 0, "Service action out(12)"}, {0xaa, 0, "Write(12)"}, /* SBC-3 r31 recommends Write(16) */ {0xab, 0, "Service action in(12)"}, {0xac, 0, "erase(12)"}, {0xac, PDT_MMC, "Get performance"}, {0xad, PDT_MMC, "Read DVD/BD structure"}, {0xae, 0, "Write and verify(12)"}, /* SBC-3 r31 recommends Write and verify(16) */ {0xaf, 0, "Verify(12)"}, /* SBC-3 r31 recommends Verify(16) */ {0xb0, 0, "Search data high(12)"}, {0xb1, 0, "Search data equal(12)"}, {0xb1, PDT_MCHANGER, "Open/close import/export element"}, {0xb2, 0, "Search data low(12)"}, {0xb3, 0, "Set limits(12)"}, {0xb4, 0, "Read element status attached"}, {0xb5, 0, "Security protocol out"}, {0xb5, PDT_MCHANGER, "Request volume element address"}, {0xb6, 0, "Send volume tag"}, {0xb6, PDT_MMC, "Set streaming"}, {0xb7, 0, "Read defect data(12)"}, {0xb8, 0, "Read element status"}, {0xb9, 0, "Read CD msf"}, {0xba, 0, "Redundancy group in"}, {0xba, PDT_MMC, "Scan"}, {0xbb, 0, "Redundancy group out"}, {0xbb, PDT_MMC, "Set CD speed"}, {0xbc, 0, "Spare in"}, {0xbd, 0, "Spare out"}, {0xbd, PDT_MMC, "Mechanism status"}, {0xbe, 0, "Volume set in"}, {0xbe, PDT_MMC, "Read CD"}, {0xbf, 0, "Volume set out"}, {0xbf, PDT_MMC, "Send DVD/BD structure"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_read_buff_arr[] = { /* opcode 0x3c */ {0x0, 0, "combined header and data [or multiple modes]"}, {0x2, 0, "data"}, {0x3, 0, "descriptor"}, {0xa, 0, "read data from echo buffer"}, {0xb, 0, "echo buffer descriptor"}, {0x1a, 0, "enable expander comms protocol and echo buffer"}, {0x1c, 0, "error history"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_write_buff_arr[] = { /* opcode 0x3b */ {0x0, 0, "combined header and data [or multiple modes]"}, {0x2, 0, "data"}, {0x4, 0, "download microcode and activate"}, {0x5, 0, "download microcode, save, and activate"}, {0x6, 0, "download microcode with offsets and activate"}, {0x7, 0, "download microcode with offsets, save, and activate"}, {0xa, 0, "write data to echo buffer"}, {0xd, 0, "download microcode with offsets, select activation events, " " save and defer activate"}, {0xe, 0, "download microcode with offsets, save and defer activate"}, {0xf, 0, "activate deferred microcode"}, {0x1a, 0, "enable expander comms protocol and echo buffer"}, {0x1b, 0, "disable expander comms protocol"}, {0x1c, 0, "download application client error history"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_maint_in_arr[] = { /* opcode 0xa3 */ {0x5, 0, "Report identifying information"}, /* was "Report device identifier" prior to spc4r07 */ {0xa, 0, "Report target port groups"}, {0xb, 0, "Report aliases"}, {0xc, 0, "Report supported operation codes"}, {0xd, 0, "Report supported task management functions"}, {0xe, 0, "Report priority"}, {0xf, 0, "Report timestamp"}, {0x10, 0, "Management protocol in"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_maint_out_arr[] = { /* opcode 0xa4 */ {0x6, 0, "Set identifying information"}, /* was "Set device identifier" prior to spc4r07 */ {0xa, 0, "Set target port groups"}, {0xb, 0, "Change aliases"}, {0xc, 0, "Remove I_T nexus"}, {0xe, 0, "Set priority"}, {0xf, 0, "Set timestamp"}, {0x10, 0, "Management protocol out"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_in12_arr[] = { /* opcode 0xab */ {0x1, 0, "Read media serial number"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_out12_arr[] = { /* opcode 0xa9 */ {0xff, 0, "Impossible command name"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_in16_arr[] = { /* opcode 0x9e */ {0x10, 0, "Read capacity(16)"}, {0x11, 0, "Read long(16)"}, {0x12, 0, "Get LBA status"}, {0x13, 0, "Report referrals"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_out16_arr[] = { /* opcode 0x9f */ {0x11, 0, "Write long(16)"}, {0x1f, PDT_ADC, "Notify data transfer device(16)"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_bidi_arr[] = { /* opcode 0x9d */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_pr_in_arr[] = { /* opcode 0x5e */ {0x0, 0, "Persistent reserve in, read keys"}, {0x1, 0, "Persistent reserve in, read reservation"}, {0x2, 0, "Persistent reserve in, report capabilities"}, {0x3, 0, "Persistent reserve in, read full status"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_pr_out_arr[] = { /* opcode 0x5f */ {0x0, 0, "Persistent reserve out, register"}, {0x1, 0, "Persistent reserve out, reserve"}, {0x2, 0, "Persistent reserve out, release"}, {0x3, 0, "Persistent reserve out, clear"}, {0x4, 0, "Persistent reserve out, preempt"}, {0x5, 0, "Persistent reserve out, preempt and abort"}, {0x6, 0, "Persistent reserve out, register and ignore existing key"}, {0x7, 0, "Persistent reserve out, register and move"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_xcopy_sa_arr[] = { /* opcode 0x83 */ {0x0, 0, "Extended copy(lid1)"}, {0x1, 0, "Extended copy(lid4)"}, {0x10, 0, "Populate token"}, {0x11, 0, "Write using token"}, {0x1c, 0, "Extended copy abort"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_rec_copy_sa_arr[] = { /* opcode 0x84 */ {0x0, 0, "Receive copy status(lid1)"}, {0x1, 0, "Receive copy data(lid1)"}, {0x3, 0, "Receive copy operating parameters"}, {0x4, 0, "Receive copy failure details(lid1)"}, {0x5, 0, "Receive copy status(lid4)"}, {0x6, 0, "Receive copy data(lid4)"}, {0x7, 0, "Receive ROD token information"}, {0x8, 0, "Report all ROD tokens"}, {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_variable_length_arr[] = { {0x1, 0, "Rebuild(32)"}, {0x2, 0, "Regenerate(32)"}, {0x3, 0, "Xdread(32)"}, /* obsolete in SBC-3 r31 */ {0x4, 0, "Xdwrite(32)"}, /* obsolete in SBC-3 r31 */ {0x5, 0, "Xdwrite extended(32)"}, {0x6, 0, "Xpwrite(32)"}, {0x7, 0, "Xdwriteread(32)"}, {0x8, 0, "Xdwrite extended(64)"}, {0x9, 0, "Read(32)"}, {0xa, 0, "Verify(32)"}, {0xb, 0, "Write(32)"}, {0xc, 0, "Write an verify(32)"}, {0xd, 0, "Write same(32)"}, {0xe, 0, "Orwrite(32)"}, /* added sbc3r25 */ {0x1800, 0, "Receive credential"}, {0x8801, 0, "Format OSD (osd)"}, {0x8802, 0, "Create (osd)"}, {0x8803, 0, "List (osd)"}, {0x8805, 0, "Read (osd)"}, {0x8806, 0, "Write (osd)"}, {0x8807, 0, "Append (osd)"}, {0x8808, 0, "Flush (osd)"}, {0x880a, 0, "Remove (osd)"}, {0x880b, 0, "Create partition (osd)"}, {0x880c, 0, "Remove partition (osd)"}, {0x880e, 0, "Get attributes (osd)"}, {0x880f, 0, "Set attributes (osd)"}, {0x8812, 0, "Create and write (osd)"}, {0x8815, 0, "Create collection (osd)"}, {0x8816, 0, "Remove collection (osd)"}, {0x8817, 0, "List collection (osd)"}, {0x8818, 0, "Set key (osd)"}, {0x8819, 0, "Set master key (osd)"}, {0x881a, 0, "Flush collection (osd)"}, {0x881b, 0, "Flush partition (osd)"}, {0x881c, 0, "Flush OSD (osd)"}, {0x8880, 0, "Object structure check (osd-2)"}, {0x8881, 0, "Format OSD (osd-2)"}, {0x8882, 0, "Create (osd-2)"}, {0x8883, 0, "List (osd-2)"}, {0x8884, 0, "Punch (osd-2)"}, {0x8885, 0, "Read (osd-2)"}, {0x8886, 0, "Write (osd-2)"}, {0x8887, 0, "Append (osd-2)"}, {0x8888, 0, "Flush (osd-2)"}, {0x8889, 0, "Clear (osd-2)"}, {0x888a, 0, "Remove (osd-2)"}, {0x888b, 0, "Create partition (osd-2)"}, {0x888c, 0, "Remove partition (osd-2)"}, {0x888e, 0, "Get attributes (osd-2)"}, {0x888f, 0, "Set attributes (osd-2)"}, {0x8892, 0, "Create and write (osd-2)"}, {0x8895, 0, "Create collection (osd-2)"}, {0x8896, 0, "Remove collection (osd-2)"}, {0x8897, 0, "List collection (osd-2)"}, {0x8898, 0, "Set key (osd-2)"}, {0x8899, 0, "Set master key (osd-2)"}, {0x889a, 0, "Flush collection (osd-2)"}, {0x889b, 0, "Flush partition (osd-2)"}, {0x889c, 0, "Flush OSD (osd-2)"}, {0x88a0, 0, "Query (osd-2)"}, {0x88a1, 0, "Remove member objects (osd-2)"}, {0x88a2, 0, "Get member attributes (osd-2)"}, {0x88a3, 0, "Set member attributes (osd-2)"}, {0x88b1, 0, "Read map (osd-2)"}, {0x8f7c, 0, "Perform SCSI command (osd-2)"}, {0x8f7d, 0, "Perform task management function (osd-2)"}, {0x8f7e, 0, "Perform SCSI command (osd)"}, {0x8f7f, 0, "Perform task management function (osd)"}, {0xffff, 0, NULL}, }; #else struct sg_lib_value_name_t sg_lib_normal_opcodes[] = { {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_read_buff_arr[] = { /* opcode 0x3c */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_write_buff_arr[] = { /* opcode 0x3b */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_maint_in_arr[] = { /* opcode 0xa3 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_maint_out_arr[] = { /* opcode 0xa4 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_in12_arr[] = { /* opcode 0xab */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_out12_arr[] = { /* opcode 0xa9 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_in16_arr[] = { /* opcode 0x9e */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_out16_arr[] = { /* opcode 0x9f */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_serv_bidi_arr[] = { /* opcode 0x9d */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_pr_in_arr[] = { /* opcode 0x5e */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_pr_out_arr[] = { /* opcode 0x5f */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_xcopy_sa_arr[] = { /* opcode 0x83 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_rec_copy_sa_arr[] = { /* opcode 0x84 */ {0xffff, 0, NULL}, }; struct sg_lib_value_name_t sg_lib_variable_length_arr[] = { {0xffff, 0, NULL}, }; #endif /* A conveniently formatted list of SCSI ASC/ASCQ codes and their * corresponding text can be found at: www.t10.org/lists/asc-num.txt * The following should match asc-num.txt dated 20111222 */ #ifdef SG_SCSI_STRINGS struct sg_lib_asc_ascq_range_t sg_lib_asc_ascq_range[] = { {0x40,0x01,0x7f,"Ram failure [0x%x]"}, {0x40,0x80,0xff,"Diagnostic failure on component [0x%x]"}, {0x41,0x01,0xff,"Data path failure [0x%x]"}, {0x42,0x01,0xff,"Power-on or self-test failure [0x%x]"}, {0x4d,0x00,0xff,"Tagged overlapped commands [0x%x]"}, {0x70,0x00,0xff,"Decompression exception short algorithm id of 0x%x"}, {0, 0, 0, NULL} }; struct sg_lib_asc_ascq_t sg_lib_asc_ascq[] = { {0x00,0x00,"No additional sense information"}, {0x00,0x01,"Filemark detected"}, {0x00,0x02,"End-of-partition/medium detected"}, {0x00,0x03,"Setmark detected"}, {0x00,0x04,"Beginning-of-partition/medium detected"}, {0x00,0x05,"End-of-data detected"}, {0x00,0x06,"I/O process terminated"}, {0x00,0x07,"Programmable early warning detected"}, {0x00,0x11,"Audio play operation in progress"}, {0x00,0x12,"Audio play operation paused"}, {0x00,0x13,"Audio play operation successfully completed"}, {0x00,0x14,"Audio play operation stopped due to error"}, {0x00,0x15,"No current audio status to return"}, {0x00,0x16,"operation in progress"}, {0x00,0x17,"Cleaning requested"}, {0x00,0x18,"Erase operation in progress"}, {0x00,0x19,"Locate operation in progress"}, {0x00,0x1a,"Rewind operation in progress"}, {0x00,0x1b,"Set capacity operation in progress"}, {0x00,0x1c,"Verify operation in progress"}, {0x00,0x1d,"ATA pass through information available"}, {0x00,0x1e,"Conflicting SA creation request"}, {0x00,0x1f,"Logical unit transitioning to another power condition"}, {0x00,0x20,"Extended copy information available"}, {0x01,0x00,"No index/sector signal"}, {0x02,0x00,"No seek complete"}, {0x03,0x00,"Peripheral device write fault"}, {0x03,0x01,"No write current"}, {0x03,0x02,"Excessive write errors"}, {0x04,0x00,"Logical unit not ready, cause not reportable"}, {0x04,0x01,"Logical unit is in process of becoming ready"}, {0x04,0x02,"Logical unit not ready, " "initializing command required"}, {0x04,0x03,"Logical unit not ready, " "manual intervention required"}, {0x04,0x04,"Logical unit not ready, format in progress"}, {0x04,0x05,"Logical unit not ready, rebuild in progress"}, {0x04,0x06,"Logical unit not ready, recalculation in progress"}, {0x04,0x07,"Logical unit not ready, operation in progress"}, {0x04,0x08,"Logical unit not ready, long write in progress"}, {0x04,0x09,"Logical unit not ready, self-test in progress"}, {0x04,0x0a,"Logical unit " "not accessible, asymmetric access state transition"}, {0x04,0x0b,"Logical unit " "not accessible, target port in standby state"}, {0x04,0x0c,"Logical unit " "not accessible, target port in unavailable state"}, {0x04,0x0d,"Logical unit not ready, structure check required"}, {0x04,0x10,"Logical unit not ready, " "auxiliary memory not accessible"}, {0x04,0x11,"Logical unit not ready, " "notify (enable spinup) required"}, {0x04,0x12,"Logical unit not ready, offline"}, {0x04,0x13,"Logical unit not ready, SA creation in progress"}, {0x04,0x14,"Logical unit not ready, space allocation in progress"}, {0x04,0x15,"Logical unit not ready, robotics disabled"}, {0x04,0x16,"Logical unit not ready, configuration required"}, {0x04,0x17,"Logical unit not ready, calibration required"}, {0x04,0x18,"Logical unit not ready, a door is open"}, {0x04,0x19,"Logical unit not ready, operating in sequential mode"}, {0x04,0x1a,"Logical unit not ready, start stop unit command in progress"}, {0x04,0x1b,"Logical unit not ready, sanitize in progress"}, {0x04,0x1c,"Logical unit not ready, additional power use not yet " "granted"}, {0x05,0x00,"Logical unit does not respond to selection"}, {0x06,0x00,"No reference position found"}, {0x07,0x00,"Multiple peripheral devices selected"}, {0x08,0x00,"Logical unit communication failure"}, {0x08,0x01,"Logical unit communication time-out"}, {0x08,0x02,"Logical unit communication parity error"}, {0x08,0x03,"Logical unit communication CRC error (Ultra-DMA/32)"}, {0x08,0x04,"Unreachable copy target"}, {0x09,0x00,"Track following error"}, {0x09,0x01,"Tracking servo failure"}, {0x09,0x02,"Focus servo failure"}, {0x09,0x03,"Spindle servo failure"}, {0x09,0x04,"Head select fault"}, {0x0A,0x00,"Error log overflow"}, {0x0B,0x00,"Warning"}, {0x0B,0x01,"Warning - specified temperature exceeded"}, {0x0B,0x02,"Warning - enclosure degraded"}, {0x0B,0x03,"Warning - background self-test failed"}, {0x0B,0x04,"Warning - background pre-scan detected medium error"}, {0x0B,0x05,"Warning - background medium scan detected medium error"}, {0x0B,0x06,"Warning - non-volatile cache now volatile"}, {0x0B,0x07,"Warning - degraded power to non-volatile cache"}, {0x0B,0x08,"Warning - power loss expected"}, {0x0B,0x09,"Warning - device statistics notification active"}, {0x0C,0x00,"Write error"}, {0x0C,0x01,"Write error - recovered with auto reallocation"}, {0x0C,0x02,"Write error - auto reallocation failed"}, {0x0C,0x03,"Write error - recommend reassignment"}, {0x0C,0x04,"Compression check miscompare error"}, {0x0C,0x05,"Data expansion occurred during compression"}, {0x0C,0x06,"Block not compressible"}, {0x0C,0x07,"Write error - recovery needed"}, {0x0C,0x08,"Write error - recovery failed"}, {0x0C,0x09,"Write error - loss of streaming"}, {0x0C,0x0A,"Write error - padding blocks added"}, {0x0C,0x0B,"Auxiliary memory write error"}, {0x0C,0x0C,"Write error - unexpected unsolicited data"}, {0x0C,0x0D,"Write error - not enough unsolicited data"}, {0x0C,0x0E,"Multiple write errors"}, {0x0C,0x0F,"Defects in error window"}, {0x0D,0x00,"Error detected by third party temporary initiator"}, {0x0D,0x01,"Third party device failure"}, {0x0D,0x02,"Copy target device not reachable"}, {0x0D,0x03,"Incorrect copy target device type"}, {0x0D,0x04,"Copy target device data underrun"}, {0x0D,0x05,"Copy target device data overrun"}, {0x0E,0x00,"Invalid information unit"}, {0x0E,0x01,"Information unit too short"}, {0x0E,0x02,"Information unit too long"}, {0x0E,0x03,"Invalid field in command information unit"}, {0x10,0x00,"Id CRC or ECC error"}, {0x10,0x01,"Logical block guard check failed"}, {0x10,0x02,"Logical block application tag check failed"}, {0x10,0x03,"Logical block reference tag check failed"}, {0x10,0x04,"Logical block protection error on recover buffered data"}, {0x10,0x05,"Logical block protection method error"}, {0x11,0x00,"Unrecovered read error"}, {0x11,0x01,"Read retries exhausted"}, {0x11,0x02,"Error too long to correct"}, {0x11,0x03,"Multiple read errors"}, {0x11,0x04,"Unrecovered read error - auto reallocate failed"}, {0x11,0x05,"L-EC uncorrectable error"}, {0x11,0x06,"CIRC unrecovered error"}, {0x11,0x07,"Data re-synchronization error"}, {0x11,0x08,"Incomplete block read"}, {0x11,0x09,"No gap found"}, {0x11,0x0A,"Miscorrected error"}, {0x11,0x0B,"Unrecovered read error - recommend reassignment"}, {0x11,0x0C,"Unrecovered read error - recommend rewrite the data"}, {0x11,0x0D,"De-compression CRC error"}, {0x11,0x0E,"Cannot decompress using declared algorithm"}, {0x11,0x0F,"Error reading UPC/EAN number"}, {0x11,0x10,"Error reading ISRC number"}, {0x11,0x11,"Read error - loss of streaming"}, {0x11,0x12,"Auxiliary memory read error"}, {0x11,0x13,"Read error - failed retransmission request"}, {0x11,0x14,"Read error - LBA marked bad by application client"}, {0x12,0x00,"Address mark not found for id field"}, {0x13,0x00,"Address mark not found for data field"}, {0x14,0x00,"Recorded entity not found"}, {0x14,0x01,"Record not found"}, {0x14,0x02,"Filemark or setmark not found"}, {0x14,0x03,"End-of-data not found"}, {0x14,0x04,"Block sequence error"}, {0x14,0x05,"Record not found - recommend reassignment"}, {0x14,0x06,"Record not found - data auto-reallocated"}, {0x14,0x07,"Locate operation failure"}, {0x15,0x00,"Random positioning error"}, {0x15,0x01,"Mechanical positioning error"}, {0x15,0x02,"Positioning error detected by read of medium"}, {0x16,0x00,"Data synchronization mark error"}, {0x16,0x01,"Data sync error - data rewritten"}, {0x16,0x02,"Data sync error - recommend rewrite"}, {0x16,0x03,"Data sync error - data auto-reallocated"}, {0x16,0x04,"Data sync error - recommend reassignment"}, {0x17,0x00,"Recovered data with no error correction applied"}, {0x17,0x01,"Recovered data with retries"}, {0x17,0x02,"Recovered data with positive head offset"}, {0x17,0x03,"Recovered data with negative head offset"}, {0x17,0x04,"Recovered data with retries and/or circ applied"}, {0x17,0x05,"Recovered data using previous sector id"}, {0x17,0x06,"Recovered data without ECC - data auto-reallocated"}, {0x17,0x07,"Recovered data without ECC - recommend reassignment"}, {0x17,0x08,"Recovered data without ECC - recommend rewrite"}, {0x17,0x09,"Recovered data without ECC - data rewritten"}, {0x18,0x00,"Recovered data with error correction applied"}, {0x18,0x01,"Recovered data with error corr. & retries applied"}, {0x18,0x02,"Recovered data - data auto-reallocated"}, {0x18,0x03,"Recovered data with CIRC"}, {0x18,0x04,"Recovered data with L-EC"}, {0x18,0x05,"Recovered data - recommend reassignment"}, {0x18,0x06,"Recovered data - recommend rewrite"}, {0x18,0x07,"Recovered data with ECC - data rewritten"}, {0x18,0x08,"Recovered data with linking"}, {0x19,0x00,"Defect list error"}, {0x19,0x01,"Defect list not available"}, {0x19,0x02,"Defect list error in primary list"}, {0x19,0x03,"Defect list error in grown list"}, {0x1A,0x00,"Parameter list length error"}, {0x1B,0x00,"Synchronous data transfer error"}, {0x1C,0x00,"Defect list not found"}, {0x1C,0x01,"Primary defect list not found"}, {0x1C,0x02,"Grown defect list not found"}, {0x1D,0x00,"Miscompare during verify operation"}, {0x1D,0x01,"Miscompare verify of unmapped lba"}, {0x1E,0x00,"Recovered id with ECC correction"}, {0x1F,0x00,"Partial defect list transfer"}, {0x20,0x00,"Invalid command operation code"}, {0x20,0x01,"Access denied - initiator pending-enrolled"}, {0x20,0x02,"Access denied - no access rights"}, {0x20,0x03,"Access denied - invalid mgmt id key"}, {0x20,0x04,"Illegal command while in write capable state"}, {0x20,0x05,"Write type operation while in read capable state (obs)"}, {0x20,0x06,"Illegal command while in explicit address mode"}, {0x20,0x07,"Illegal command while in implicit address mode"}, {0x20,0x08,"Access denied - enrollment conflict"}, {0x20,0x09,"Access denied - invalid LU identifier"}, {0x20,0x0A,"Access denied - invalid proxy token"}, {0x20,0x0B,"Access denied - ACL LUN conflict"}, {0x20,0x0C,"Illegal command when not in append-only mode"}, {0x21,0x00,"Logical block address out of range"}, {0x21,0x01,"Invalid element address"}, {0x21,0x02,"Invalid address for write"}, {0x21,0x03,"Invalid write crossing layer jump"}, {0x22,0x00,"Illegal function (use 20 00, 24 00, or 26 00)"}, {0x23,0x00,"Invalid token operation, cause not reportable"}, {0x23,0x01,"Invalid token operation, unsupported token type"}, {0x23,0x02,"Invalid token operation, remote token usage not supported"}, {0x23,0x03,"invalid token operation, remote rod token creation not " "supported"}, {0x23,0x04,"Invalid token operation, token unknown"}, {0x23,0x05,"Invalid token operation, token corrupt"}, {0x23,0x06,"Invalid token operation, token revoked"}, {0x23,0x07,"Invalid token operation, token expired"}, {0x23,0x08,"Invalid token operation, token cancelled"}, {0x23,0x09,"Invalid token operation, token deleted"}, {0x23,0x0a,"Invalid token operation, invalid token length"}, {0x24,0x00,"Invalid field in cdb"}, {0x24,0x01,"CDB decryption error"}, {0x24,0x02,"Invalid cdb field while in explicit block model (obs)"}, {0x24,0x03,"Invalid cdb field while in implicit block model (obs)"}, {0x24,0x04,"Security audit value frozen"}, {0x24,0x05,"Security working key frozen"}, {0x24,0x06,"Nonce not unique"}, {0x24,0x07,"Nonce timestamp out of range"}, {0x24,0x08,"Invalid xcdb"}, {0x25,0x00,"Logical unit not supported"}, {0x26,0x00,"Invalid field in parameter list"}, {0x26,0x01,"Parameter not supported"}, {0x26,0x02,"Parameter value invalid"}, {0x26,0x03,"Threshold parameters not supported"}, {0x26,0x04,"Invalid release of persistent reservation"}, {0x26,0x05,"Data decryption error"}, {0x26,0x06,"Too many target descriptors"}, {0x26,0x07,"Unsupported target descriptor type code"}, {0x26,0x08,"Too many segment descriptors"}, {0x26,0x09,"Unsupported segment descriptor type code"}, {0x26,0x0A,"Unexpected inexact segment"}, {0x26,0x0B,"Inline data length exceeded"}, {0x26,0x0C,"Invalid operation for copy source or destination"}, {0x26,0x0D,"Copy segment granularity violation"}, {0x26,0x0E,"Invalid parameter while port is enabled"}, {0x26,0x0F,"Invalid data-out buffer integrity check value"}, {0x26,0x10,"Data decryption key fail limit reached"}, {0x26,0x11,"Incomplete key-associated data set"}, {0x26,0x12,"Vendor specific key reference not found"}, {0x27,0x00,"Write protected"}, {0x27,0x01,"Hardware write protected"}, {0x27,0x02,"Logical unit software write protected"}, {0x27,0x03,"Associated write protect"}, {0x27,0x04,"Persistent write protect"}, {0x27,0x05,"Permanent write protect"}, {0x27,0x06,"Conditional write protect"}, {0x27,0x07,"Space allocation failed write protect"}, {0x28,0x00,"Not ready to ready change, medium may have changed"}, {0x28,0x01,"Import or export element accessed"}, {0x28,0x02,"Format-layer may have changed"}, {0x28,0x03,"Import/export element accessed, medium changed"}, {0x29,0x00,"Power on, reset, or bus device reset occurred"}, {0x29,0x01,"Power on occurred"}, {0x29,0x02,"SCSI bus reset occurred"}, {0x29,0x03,"Bus device reset function occurred"}, {0x29,0x04,"Device internal reset"}, {0x29,0x05,"Transceiver mode changed to single-ended"}, {0x29,0x06,"Transceiver mode changed to lvd"}, {0x29,0x07,"I_T nexus loss occurred"}, {0x2A,0x00,"Parameters changed"}, {0x2A,0x01,"Mode parameters changed"}, {0x2A,0x02,"Log parameters changed"}, {0x2A,0x03,"Reservations preempted"}, {0x2A,0x04,"Reservations released"}, {0x2A,0x05,"Registrations preempted"}, {0x2A,0x06,"Asymmetric access state changed"}, {0x2A,0x07,"Implicit asymmetric access state transition failed"}, {0x2A,0x08,"Priority changed"}, {0x2A,0x09,"Capacity data has changed"}, {0x2A,0x0c, "Error recovery attributes have changed"}, {0x2A,0x0d, "Data encryption capabilities changed"}, {0x2A,0x10,"Timestamp changed"}, {0x2A,0x11,"Data encryption parameters changed by another i_t nexus"}, {0x2A,0x12,"Data encryption parameters changed by vendor specific event"}, {0x2A,0x13,"Data encryption key instance counter has changed"}, {0x2A,0x0a,"Error history i_t nexus cleared"}, {0x2A,0x0b,"Error history snapshot released"}, {0x2A,0x14,"SA creation capabilities data has changed"}, {0x2A,0x15,"Medium removal prevention preempted"}, {0x2B,0x00,"Copy cannot execute since host cannot disconnect"}, {0x2C,0x00,"Command sequence error"}, {0x2C,0x01,"Too many windows specified"}, {0x2C,0x02,"Invalid combination of windows specified"}, {0x2C,0x03,"Current program area is not empty"}, {0x2C,0x04,"Current program area is empty"}, {0x2C,0x05,"Illegal power condition request"}, {0x2C,0x06,"Persistent prevent conflict"}, {0x2C,0x07,"Previous busy status"}, {0x2C,0x08,"Previous task set full status"}, {0x2C,0x09,"Previous reservation conflict status"}, {0x2C,0x0A,"Partition or collection contains user objects"}, {0x2C,0x0B,"Not reserved"}, {0x2C,0x0C,"ORWRITE generation does not match"}, {0x2D,0x00,"Overwrite error on update in place"}, {0x2E,0x00,"Insufficient time for operation"}, {0x2F,0x00,"Commands cleared by another initiator"}, {0x2F,0x01,"Commands cleared by power loss notification"}, {0x2F,0x02,"Commands cleared by device server"}, {0x2F,0x03,"Some commands cleared by queuing layer event"}, {0x30,0x00,"Incompatible medium installed"}, {0x30,0x01,"Cannot read medium - unknown format"}, {0x30,0x02,"Cannot read medium - incompatible format"}, {0x30,0x03,"Cleaning cartridge installed"}, {0x30,0x04,"Cannot write medium - unknown format"}, {0x30,0x05,"Cannot write medium - incompatible format"}, {0x30,0x06,"Cannot format medium - incompatible medium"}, {0x30,0x07,"Cleaning failure"}, {0x30,0x08,"Cannot write - application code mismatch"}, {0x30,0x09,"Current session not fixated for append"}, {0x30,0x0A,"Cleaning request rejected"}, {0x30,0x0B,"Cleaning tape expired"}, {0x30,0x0C,"WORM medium - overwrite attempted"}, {0x30,0x0D,"WORM medium - integrity check"}, {0x30,0x10,"Medium not formatted"}, {0x30,0x11,"Incompatible volume type"}, {0x30,0x12,"Incompatible volume qualifier"}, {0x30,0x13,"Cleaning volume expired"}, {0x31,0x00,"Medium format corrupted"}, {0x31,0x01,"Format command failed"}, {0x31,0x02,"Zoned formatting failed due to spare linking"}, {0x31,0x03,"Sanitize command failed"}, {0x32,0x00,"No defect spare location available"}, {0x32,0x01,"Defect list update failure"}, {0x33,0x00,"Tape length error"}, {0x34,0x00,"Enclosure failure"}, {0x35,0x00,"Enclosure services failure"}, {0x35,0x01,"Unsupported enclosure function"}, {0x35,0x02,"Enclosure services unavailable"}, {0x35,0x03,"Enclosure services transfer failure"}, {0x35,0x04,"Enclosure services transfer refused"}, {0x35,0x05,"Enclosure services checksum error"}, {0x36,0x00,"Ribbon, ink, or toner failure"}, {0x37,0x00,"Rounded parameter"}, {0x38,0x00,"Event status notification"}, {0x38,0x02,"Esn - power management class event"}, {0x38,0x04,"Esn - media class event"}, {0x38,0x06,"Esn - device busy class event"}, {0x38,0x07,"Thin provisioning soft threshold reached"}, {0x39,0x00,"Saving parameters not supported"}, {0x3A,0x00,"Medium not present"}, {0x3A,0x01,"Medium not present - tray closed"}, {0x3A,0x02,"Medium not present - tray open"}, {0x3A,0x03,"Medium not present - loadable"}, {0x3A,0x04,"Medium not present - medium auxiliary memory accessible"}, {0x3B,0x00,"Sequential positioning error"}, {0x3B,0x01,"Tape position error at beginning-of-medium"}, {0x3B,0x02,"Tape position error at end-of-medium"}, {0x3B,0x03,"Tape or electronic vertical forms unit not ready"}, {0x3B,0x04,"Slew failure"}, {0x3B,0x05,"Paper jam"}, {0x3B,0x06,"Failed to sense top-of-form"}, {0x3B,0x07,"Failed to sense bottom-of-form"}, {0x3B,0x08,"Reposition error"}, {0x3B,0x09,"Read past end of medium"}, {0x3B,0x0A,"Read past beginning of medium"}, {0x3B,0x0B,"Position past end of medium"}, {0x3B,0x0C,"Position past beginning of medium"}, {0x3B,0x0D,"Medium destination element full"}, {0x3B,0x0E,"Medium source element empty"}, {0x3B,0x0F,"End of medium reached"}, {0x3B,0x11,"Medium magazine not accessible"}, {0x3B,0x12,"Medium magazine removed"}, {0x3B,0x13,"Medium magazine inserted"}, {0x3B,0x14,"Medium magazine locked"}, {0x3B,0x15,"Medium magazine unlocked"}, {0x3B,0x16,"Mechanical positioning or changer error"}, {0x3B,0x17,"Read past end of user object"}, {0x3B,0x18,"Element disabled"}, {0x3B,0x19,"Element enabled"}, {0x3B,0x1a,"Data transfer device removed"}, {0x3B,0x1b,"Data transfer device inserted"}, {0x3B,0x1c,"Too many logical objects on partition to support operation"}, {0x3D,0x00,"Invalid bits in identify message"}, {0x3E,0x00,"Logical unit has not self-configured yet"}, {0x3E,0x01,"Logical unit failure"}, {0x3E,0x02,"Timeout on logical unit"}, {0x3E,0x03,"Logical unit failed self-test"}, {0x3E,0x04,"Logical unit unable to update self-test log"}, {0x3F,0x00,"Target operating conditions have changed"}, {0x3F,0x01,"Microcode has been changed"}, {0x3F,0x02,"Changed operating definition"}, {0x3F,0x03,"Inquiry data has changed"}, {0x3F,0x04,"Component device attached"}, {0x3F,0x05,"Device identifier changed"}, {0x3F,0x06,"Redundancy group created or modified"}, {0x3F,0x07,"Redundancy group deleted"}, {0x3F,0x08,"Spare created or modified"}, {0x3F,0x09,"Spare deleted"}, {0x3F,0x0A,"Volume set created or modified"}, {0x3F,0x0B,"Volume set deleted"}, {0x3F,0x0C,"Volume set deassigned"}, {0x3F,0x0D,"Volume set reassigned"}, {0x3F,0x0E,"Reported luns data has changed"}, {0x3F,0x0F,"Echo buffer overwritten"}, {0x3F,0x10,"Medium loadable"}, {0x3F,0x11,"Medium auxiliary memory accessible"}, {0x3F,0x12,"iSCSI IP address added"}, {0x3F,0x13,"iSCSI IP address removed"}, {0x3F,0x14,"iSCSI IP address changed"}, /* * ASC 0x40, 0x41 and 0x42 overridden by "additional2" array entries * for ascq > 1. Preferred error message for this group is * "Diagnostic failure on component nn (80h-ffh)". */ {0x40,0x00,"Ram failure (should use 40 nn)"}, {0x41,0x00,"Data path failure (should use 40 nn)"}, {0x42,0x00,"Power-on or self-test failure (should use 40 nn)"}, {0x43,0x00,"Message error"}, {0x44,0x00,"Internal target failure"}, {0x44,0x01,"Persistent reservation information lost"}, {0x44,0x71,"ATA device failed Set Features"}, {0x45,0x00,"Select or reselect failure"}, {0x46,0x00,"Unsuccessful soft reset"}, {0x47,0x00,"SCSI parity error"}, {0x47,0x01,"Data phase CRC error detected"}, {0x47,0x02,"SCSI parity error detected during st data phase"}, {0x47,0x03,"Information unit iuCRC error detected"}, {0x47,0x04,"Asynchronous information protection error detected"}, {0x47,0x05,"Protocol service CRC error"}, {0x47,0x06,"Phy test function in progress"}, {0x47,0x7F,"Some commands cleared by iSCSI protocol event"}, {0x48,0x00,"Initiator detected error message received"}, {0x49,0x00,"Invalid message error"}, {0x4A,0x00,"Command phase error"}, {0x4B,0x00,"Data phase error"}, {0x4B,0x01,"Invalid target port transfer tag received"}, {0x4B,0x02,"Too much write data"}, {0x4B,0x03,"Ack/nak timeout"}, {0x4B,0x04,"Nak received"}, {0x4B,0x05,"Data offset error"}, {0x4B,0x06,"Initiator response timeout"}, {0x4B,0x07,"Connection lost"}, {0x4B,0x08,"Data-in buffer overflow - data buffer size"}, {0x4B,0x09,"Data-in buffer overflow - data buffer descriptor area"}, {0x4B,0x0A,"Data-in buffer error"}, {0x4B,0x0B,"Data-out buffer overflow - data buffer size"}, {0x4B,0x0C,"Data-out buffer overflow - data buffer descriptor area"}, {0x4B,0x0D,"Data-out buffer error"}, {0x4C,0x00,"Logical unit failed self-configuration"}, /* * ASC 0x4D overridden by an "additional2" array entry * so there is no need to have them here. */ /* {0x4D,0x00,"Tagged overlapped commands (nn = queue tag)"}, */ {0x4E,0x00,"Overlapped commands attempted"}, {0x50,0x00,"Write append error"}, {0x50,0x01,"Write append position error"}, {0x50,0x02,"Position error related to timing"}, {0x51,0x00,"Erase failure"}, {0x51,0x01,"Erase failure - incomplete erase operation detected"}, {0x52,0x00,"Cartridge fault"}, {0x53,0x00,"Media load or eject failed"}, {0x53,0x01,"Unload tape failure"}, {0x53,0x02,"Medium removal prevented"}, {0x53,0x03,"Medium removal prevented by data transfer element"}, {0x53,0x04,"Medium thread or unthread failure"}, {0x53,0x05,"Volume identifier invalid"}, {0x53,0x06,"Volume identifier missing"}, {0x53,0x07,"Duplicate volume identifier"}, {0x53,0x08,"Element status unknown"}, {0x54,0x00,"SCSI to host system interface failure"}, {0x55,0x00,"System resource failure"}, {0x55,0x01,"System buffer full"}, {0x55,0x02,"Insufficient reservation resources"}, {0x55,0x03,"Insufficient resources"}, {0x55,0x04,"Insufficient registration resources"}, {0x55,0x05,"Insufficient access control resources"}, {0x55,0x06,"Auxiliary memory out of space"}, {0x55,0x07,"Quota error"}, {0x55,0x08,"Maximum number of supplemental decryption keys exceeded"}, {0x55,0x09,"Medium auxiliary memory not accessible"}, {0x55,0x0a,"Data currently unavailable"}, {0x55,0x0b,"Insufficient power for operation"}, {0x55,0x0c,"Insufficient resources to create rod"}, {0x55,0x0d,"Insufficient resources to create rod token"}, {0x57,0x00,"Unable to recover table-of-contents"}, {0x58,0x00,"Generation does not exist"}, {0x59,0x00,"Updated block read"}, {0x5A,0x00,"Operator request or state change input"}, {0x5A,0x01,"Operator medium removal request"}, {0x5A,0x02,"Operator selected write protect"}, {0x5A,0x03,"Operator selected write permit"}, {0x5B,0x00,"Log exception"}, {0x5B,0x01,"Threshold condition met"}, {0x5B,0x02,"Log counter at maximum"}, {0x5B,0x03,"Log list codes exhausted"}, {0x5C,0x00,"Rpl status change"}, {0x5C,0x01,"Spindles synchronized"}, {0x5C,0x02,"Spindles not synchronized"}, {0x5D,0x00,"Failure prediction threshold exceeded"}, {0x5D,0x01,"Media failure prediction threshold exceeded"}, {0x5D,0x02,"Logical unit failure prediction threshold exceeded"}, {0x5D,0x03,"spare area exhaustion prediction threshold exceeded"}, {0x5D,0x10,"Hardware impending failure general hard drive failure"}, {0x5D,0x11,"Hardware impending failure drive error rate too high" }, {0x5D,0x12,"Hardware impending failure data error rate too high" }, {0x5D,0x13,"Hardware impending failure seek error rate too high" }, {0x5D,0x14,"Hardware impending failure too many block reassigns"}, {0x5D,0x15,"Hardware impending failure access times too high" }, {0x5D,0x16,"Hardware impending failure start unit times too high" }, {0x5D,0x17,"Hardware impending failure channel parametrics"}, {0x5D,0x18,"Hardware impending failure controller detected"}, {0x5D,0x19,"Hardware impending failure throughput performance"}, {0x5D,0x1A,"Hardware impending failure seek time performance"}, {0x5D,0x1B,"Hardware impending failure spin-up retry count"}, {0x5D,0x1C,"Hardware impending failure drive calibration retry count"}, {0x5D,0x20,"Controller impending failure general hard drive failure"}, {0x5D,0x21,"Controller impending failure drive error rate too high" }, {0x5D,0x22,"Controller impending failure data error rate too high" }, {0x5D,0x23,"Controller impending failure seek error rate too high" }, {0x5D,0x24,"Controller impending failure too many block reassigns"}, {0x5D,0x25,"Controller impending failure access times too high" }, {0x5D,0x26,"Controller impending failure start unit times too high" }, {0x5D,0x27,"Controller impending failure channel parametrics"}, {0x5D,0x28,"Controller impending failure controller detected"}, {0x5D,0x29,"Controller impending failure throughput performance"}, {0x5D,0x2A,"Controller impending failure seek time performance"}, {0x5D,0x2B,"Controller impending failure spin-up retry count"}, {0x5D,0x2C,"Controller impending failure drive calibration retry count"}, {0x5D,0x30,"Data channel impending failure general hard drive failure"}, {0x5D,0x31,"Data channel impending failure drive error rate too high" }, {0x5D,0x32,"Data channel impending failure data error rate too high" }, {0x5D,0x33,"Data channel impending failure seek error rate too high" }, {0x5D,0x34,"Data channel impending failure too many block reassigns"}, {0x5D,0x35,"Data channel impending failure access times too high" }, {0x5D,0x36,"Data channel impending failure start unit times too high" }, {0x5D,0x37,"Data channel impending failure channel parametrics"}, {0x5D,0x38,"Data channel impending failure controller detected"}, {0x5D,0x39,"Data channel impending failure throughput performance"}, {0x5D,0x3A,"Data channel impending failure seek time performance"}, {0x5D,0x3B,"Data channel impending failure spin-up retry count"}, {0x5D,0x3C,"Data channel impending failure drive calibration retry count"}, {0x5D,0x40,"Servo impending failure general hard drive failure"}, {0x5D,0x41,"Servo impending failure drive error rate too high" }, {0x5D,0x42,"Servo impending failure data error rate too high" }, {0x5D,0x43,"Servo impending failure seek error rate too high" }, {0x5D,0x44,"Servo impending failure too many block reassigns"}, {0x5D,0x45,"Servo impending failure access times too high" }, {0x5D,0x46,"Servo impending failure start unit times too high" }, {0x5D,0x47,"Servo impending failure channel parametrics"}, {0x5D,0x48,"Servo impending failure controller detected"}, {0x5D,0x49,"Servo impending failure throughput performance"}, {0x5D,0x4A,"Servo impending failure seek time performance"}, {0x5D,0x4B,"Servo impending failure spin-up retry count"}, {0x5D,0x4C,"Servo impending failure drive calibration retry count"}, {0x5D,0x50,"Spindle impending failure general hard drive failure"}, {0x5D,0x51,"Spindle impending failure drive error rate too high" }, {0x5D,0x52,"Spindle impending failure data error rate too high" }, {0x5D,0x53,"Spindle impending failure seek error rate too high" }, {0x5D,0x54,"Spindle impending failure too many block reassigns"}, {0x5D,0x55,"Spindle impending failure access times too high" }, {0x5D,0x56,"Spindle impending failure start unit times too high" }, {0x5D,0x57,"Spindle impending failure channel parametrics"}, {0x5D,0x58,"Spindle impending failure controller detected"}, {0x5D,0x59,"Spindle impending failure throughput performance"}, {0x5D,0x5A,"Spindle impending failure seek time performance"}, {0x5D,0x5B,"Spindle impending failure spin-up retry count"}, {0x5D,0x5C,"Spindle impending failure drive calibration retry count"}, {0x5D,0x60,"Firmware impending failure general hard drive failure"}, {0x5D,0x61,"Firmware impending failure drive error rate too high" }, {0x5D,0x62,"Firmware impending failure data error rate too high" }, {0x5D,0x63,"Firmware impending failure seek error rate too high" }, {0x5D,0x64,"Firmware impending failure too many block reassigns"}, {0x5D,0x65,"Firmware impending failure access times too high" }, {0x5D,0x66,"Firmware impending failure start unit times too high" }, {0x5D,0x67,"Firmware impending failure channel parametrics"}, {0x5D,0x68,"Firmware impending failure controller detected"}, {0x5D,0x69,"Firmware impending failure throughput performance"}, {0x5D,0x6A,"Firmware impending failure seek time performance"}, {0x5D,0x6B,"Firmware impending failure spin-up retry count"}, {0x5D,0x6C,"Firmware impending failure drive calibration retry count"}, {0x5D,0xFF,"Failure prediction threshold exceeded (false)"}, {0x5E,0x00,"Low power condition on"}, {0x5E,0x01,"Idle condition activated by timer"}, {0x5E,0x02,"Standby condition activated by timer"}, {0x5E,0x03,"Idle condition activated by command"}, {0x5E,0x04,"Standby condition activated by command"}, {0x5E,0x05,"Idle_b condition activated by timer"}, {0x5E,0x06,"Idle_b condition activated by command"}, {0x5E,0x07,"Idle_c condition activated by timer"}, {0x5E,0x08,"Idle_c condition activated by command"}, {0x5E,0x09,"Standby_y condition activated by timer"}, {0x5E,0x0a,"Standby_y condition activated by command"}, {0x5E,0x41,"Power state change to active"}, {0x5E,0x42,"Power state change to idle"}, {0x5E,0x43,"Power state change to standby"}, {0x5E,0x45,"Power state change to sleep"}, {0x5E,0x47,"Power state change to device control"}, {0x60,0x00,"Lamp failure"}, {0x61,0x00,"Video acquisition error"}, {0x61,0x01,"Unable to acquire video"}, {0x61,0x02,"Out of focus"}, {0x62,0x00,"Scan head positioning error"}, {0x63,0x00,"End of user area encountered on this track"}, {0x63,0x01,"Packet does not fit in available space"}, {0x64,0x00,"Illegal mode for this track"}, {0x64,0x01,"Invalid packet size"}, {0x65,0x00,"Voltage fault"}, {0x66,0x00,"Automatic document feeder cover up"}, {0x66,0x01,"Automatic document feeder lift up"}, {0x66,0x02,"Document jam in automatic document feeder"}, {0x66,0x03,"Document miss feed automatic in document feeder"}, {0x67,0x00,"Configuration failure"}, {0x67,0x01,"Configuration of incapable logical units failed"}, {0x67,0x02,"Add logical unit failed"}, {0x67,0x03,"Modification of logical unit failed"}, {0x67,0x04,"Exchange of logical unit failed"}, {0x67,0x05,"Remove of logical unit failed"}, {0x67,0x06,"Attachment of logical unit failed"}, {0x67,0x07,"Creation of logical unit failed"}, {0x67,0x08,"Assign failure occurred"}, {0x67,0x09,"Multiply assigned logical unit"}, {0x67,0x0A,"Set target port groups command failed"}, {0x67,0x0B,"ATA device feature not enabled"}, {0x68,0x00,"Logical unit not configured"}, {0x69,0x00,"Data loss on logical unit"}, {0x69,0x01,"Multiple logical unit failures"}, {0x69,0x02,"Parity/data mismatch"}, {0x6A,0x00,"Informational, refer to log"}, {0x6B,0x00,"State change has occurred"}, {0x6B,0x01,"Redundancy level got better"}, {0x6B,0x02,"Redundancy level got worse"}, {0x6C,0x00,"Rebuild failure occurred"}, {0x6D,0x00,"Recalculate failure occurred"}, {0x6E,0x00,"Command to logical unit failed"}, {0x6F,0x00,"Copy protection key exchange failure - authentication " "failure"}, {0x6F,0x01,"Copy protection key exchange failure - key not present"}, {0x6F,0x02,"Copy protection key exchange failure - key not established"}, {0x6F,0x03,"Read of scrambled sector without authentication"}, {0x6F,0x04,"Media region code is mismatched to logical unit region"}, {0x6F,0x05,"Drive region must be permanent/region reset count error"}, {0x6F,0x06,"Insufficient block count for binding nonce recording"}, {0x6F,0x07,"Conflict in binding nonce recording"}, /* * ASC 0x70 overridden by an "additional2" array entry * so there is no need to have them here. */ /* {0x70,0x00,"Decompression exception short algorithm id of nn"}, */ {0x71,0x00,"Decompression exception long algorithm id"}, {0x72,0x00,"Session fixation error"}, {0x72,0x01,"Session fixation error writing lead-in"}, {0x72,0x02,"Session fixation error writing lead-out"}, {0x72,0x03,"Session fixation error - incomplete track in session"}, {0x72,0x04,"Empty or partially written reserved track"}, {0x72,0x05,"No more track reservations allowed"}, {0x72,0x06,"RMZ extension is not allowed"}, {0x72,0x07,"No more test zone extensions are allowed"}, {0x73,0x00,"CD control error"}, {0x73,0x01,"Power calibration area almost full"}, {0x73,0x02,"Power calibration area is full"}, {0x73,0x03,"Power calibration area error"}, {0x73,0x04,"Program memory area update failure"}, {0x73,0x05,"Program memory area is full"}, {0x73,0x06,"RMA/PMA is almost full"}, {0x73,0x10,"Current power calibration area almost full"}, {0x73,0x11,"Current power calibration area is full"}, {0x73,0x17,"RDZ is full"}, {0x74,0x00,"Security error"}, {0x74,0x01,"Unable to decrypt data"}, {0x74,0x02,"Unencrypted data encountered while decrypting"}, {0x74,0x03,"Incorrect data encryption key"}, {0x74,0x04,"Cryptographic integrity validation failed"}, {0x74,0x05,"Error decrypting data"}, {0x74,0x06,"Unknown signature verification key"}, {0x74,0x07,"Encryption parameters not useable"}, {0x74,0x08,"Digital signature validation failure"}, {0x74,0x09,"Encryption mode mismatch on read"}, {0x74,0x0a,"Encrypted block not raw read enabled"}, {0x74,0x0b,"Incorrect Encryption parameters"}, {0x74,0x0c,"Unable to decrypt parameter list"}, {0x74,0x0d,"Encryption algorithm disabled"}, {0x74,0x10,"SA creation parameter value invalid"}, {0x74,0x11,"SA creation parameter value rejected"}, {0x74,0x12,"Invalid SA usage"}, {0x74,0x21,"Data encryption configuration prevented"}, {0x74,0x30,"SA creation parameter not supported"}, {0x74,0x40,"Authentication failed"}, {0x74,0x61,"External data encryption key manager access error"}, {0x74,0x62,"External data encryption key manager error"}, {0x74,0x63,"External data encryption key not found"}, {0x74,0x64,"External data encryption request not authorized"}, {0x74,0x6e,"External data encryption control timeout"}, {0x74,0x6f,"External data encryption control error"}, {0x74,0x71,"Logical unit access not authorized"}, {0x74,0x79,"Security conflict in translated device"}, {0, 0, NULL} }; #else struct sg_lib_asc_ascq_range_t sg_lib_asc_ascq_range[] = { {0, 0, 0, NULL} }; struct sg_lib_asc_ascq_t sg_lib_asc_ascq[] = { {0, 0, NULL} }; #endif /* SG_SCSI_STRINGS */ const char * sg_lib_sense_key_desc[] = { "No Sense", /* Filemark, ILI and/or EOM; progress indication (during FORMAT); power condition sensing (REQUEST SENSE) */ "Recovered Error", /* The last command completed successfully but used error correction */ "Not Ready", /* The addressed target is not ready */ "Medium Error", /* Data error detected on the medium */ "Hardware Error", /* Controller or device failure */ "Illegal Request", "Unit Attention", /* Removable medium was changed, or the target has been reset */ "Data Protect", /* Access to the data is blocked */ "Blank Check", /* Reached unexpected written or unwritten region of the medium */ "Key=9", /* Vendor specific */ "Copy Aborted", /* COPY or COMPARE was aborted */ "Aborted Command", /* The target aborted the command */ "Equal", /* SEARCH DATA found data equal (obsolete) */ "Volume Overflow", /* Medium full with data to be written */ "Miscompare", /* Source data and data on the medium do not agree */ "Completed" /* may occur for successful cmd (spc4r23) */ }; const char * sg_lib_pdt_strs[] = { /* 0 */ "disk", "tape", "printer", "processor", /* often SAF-TE (seldom scanner) device */ "write once optical disk", /* 5 */ "cd/dvd", "scanner", /* obsolete */ "optical memory device", "medium changer", "communications", /* obsolete */ /* 0xa */ "graphics [0xa]", /* obsolete */ "graphics [0xb]", /* obsolete */ "storage array controller", "enclosure services device", "simplified direct access device", "optical card reader/writer device", /* 0x10 */ "bridge controller commands", "object based storage", "automation/driver interface", "security manager device", "0x14", "0x15", "0x16", "0x17", "0x18", "0x19", "0x1a", "0x1b", "0x1c", "0x1d", "well known logical unit", "no physical device on this lu", }; const char * sg_lib_transport_proto_strs[] = { "Fibre Channel Protocol for SCSI (FCP-4)", "SCSI Parallel Interface (SPI-5)", "Serial Storage Architecture SCSI-3 Protocol (SSA-S3P)", "Serial Bus Protocol for IEEE 1394 (SBP-3)", "SCSI RDMA Protocol (SRP)", "Internet SCSI (iSCSI)", "Serial Attached SCSI Protocol (SPL-2)", "Automation/Drive Interface Transport (ADT-2)", "AT Attachment Interface (ACS-2)", /* 0x8 */ "USB Attached SCSI (UAS-2)", "SCSI over PCI Express (SOP)", "Oxb", "Oxc", "Oxd", "Oxe", "No specific protocol" };