// Copyright (c) 2005 DMTF.  All rights reserved.
   [Deprecated { "CIM_AssociatedCacheMemory" }, 
    Version ( "2.8.0" ), 
    UMLPackagePath ( "CIM::Device::Memory" ), 
    Description ( 
       "Capabilities and management of Cache Memory. Cache memory is "
       "dedicated or allocated RAM that a Processor searches first for "
       "data, before going to \'regular\' memory. CacheMemory is used "
       "to speed up the delivery of data to a Processor. It is usually "
       "described by its closeness to the Processor (for example, "
       "Primary or Secondary Cache). \n"
       "If a DiskDrive includes RAM allocated for holding the disk\'s "
       "most recently read and/or adjacent data (in order to speed up "
       "retrieval), this also would be modeled as CacheMemory. Note "
       "that CacheMemory is NOT operating system or application level "
       "buffers but actual RAM allocated for caching data for a "
       "Processor, from a hard disk, etc." )]
class CIM_CacheMemory : CIM_Memory {

      [Deprecated { "CIM_AssociatedCacheMemory.Level" }, 
       Description ( 
          "Defines whether this is the Primary (value=3), Secondary "
          "(value=4) or Tertiary (value=5) Cache. Also, \"Other\" "
          "(1), \"Unknown\" (2) and \"Not Applicable\" (6) can be "
          "defined." ), 
       ValueMap { "1", "2", "3", "4", "5", "6" }, 
       Values { "Other", "Unknown", "Primary", "Secondary", 
          "Tertiary", "Not Applicable" }, 
       MappingStrings { "MIF.DMTF|System Cache|006.2" }]
   uint16 Level;

      [Deprecated { "CIM_AssociatedCacheMemory.WritePolicy" }, 
       Description ( 
          "Defines whether this is write-back (value=3) or "
          "write-through (value=4) Cache, or whether this "
          "information \"Varies with Address\" (5) or is defined "
          "individually for each I/O (6). Also, \"Other\" (1) and "
          "\"Unknown\" (2) can be specified." ), 
       ValueMap { "1", "2", "3", "4", "5", "6" }, 
       Values { "Other", "Unknown", "Write Back", "Write Through", 
          "Varies with Address", "Determination Per I/O" }, 
       MappingStrings { "MIF.DMTF|System Cache|006.5" }]
   uint16 WritePolicy;

      [Deprecated { "CIM_AssociatedCacheMemory.CacheType" }, 
       Description ( 
          "Defines whether this is for instruction caching "
          "(value=3), data caching (value=4) or both (value=5, "
          "\"Unified\"). Also, \"Other\" (1) and \"Unknown\" (2) "
          "can be defined." ), 
       ValueMap { "1", "2", "3", "4", "5" }, 
       Values { "Other", "Unknown", "Instruction", "Data", "Unified" }, 
       MappingStrings { "MIF.DMTF|System Cache|006.9" }]
   uint16 CacheType;

      [Deprecated { "CIM_AssociatedCacheMemory.LineSize" }, 
       Description ( 
          "Size, in bytes, of a single cache bucket or line." ), 
       Units ( "Bytes" ), 
       MappingStrings { "MIF.DMTF|System Cache|006.10" }, 
       PUnit ( "byte" )]
   uint32 LineSize;

      [Deprecated { "CIM_AssociatedCacheMemory.ReplacementPolicy" }, 
       Description ( 
          "An integer enumeration describing the algorithm to "
          "determine which cache lines or buckets should be "
          "re-used." ), 
       ValueMap { "1", "2", "3", "4", "5", "6", "7", "8" }, 
       Values { "Other", "Unknown", "Least Recently Used (LRU)", 
          "First In First Out (FIFO)", "Last In First Out (LIFO)", 
          "Least Frequently Used (LFU)", 
          "Most Frequently Used (MFU)", 
          "Data Dependent Multiple Algorithms" }, 
       MappingStrings { "MIF.DMTF|System Cache|006.12" }]
   uint16 ReplacementPolicy;

      [Deprecated { "CIM_AssociatedCacheMemory.ReadPolicy" }, 
       Description ( 
          "Policy that shall be employed by the Cache for handling "
          "read requests. For example, \"Read\", \"Read-Ahead\" or "
          "both can be specified using the values, 3, 4 or 5, "
          "respectively. If the read policy is determined "
          "individually (ie, for each request), then the value 6 "
          "(\"Determination per I/O\") should be specified. \"Other\" "
          "(1) and \"Unknown\" (2) are also valid values." ), 
       ValueMap { "1", "2", "3", "4", "5", "6" }, 
       Values { "Other", "Unknown", "Read", "Read-Ahead", 
          "Read and Read-Ahead", "Determination Per I/O" }, 
       MappingStrings { "MIF.DMTF|System Cache|006.13" }]
   uint16 ReadPolicy;

      [Deprecated { "CIM_AssociatedCacheMemory.FlushTimer" }, 
       Description ( 
          "Maximum amount of time, in seconds, dirty lines or "
          "buckets may remain in the Cache before they are flushed. "
          "A value of zero indicated that a cache flush is not "
          "controlled by a flushing timer." ), 
       Units ( "Seconds" ), 
       MappingStrings { "MIF.DMTF|System Cache|006.14" }, 
       PUnit ( "second" )]
   uint32 FlushTimer;

      [Deprecated { "CIM_AssociatedCacheMemory.Associativity" }, 
       Description ( 
          "An integer enumeration defining the system cache "
          "associativity. For example, 6 indicates a fully "
          "associative cache." ), 
       ValueMap { "1", "2", "3", "4", "5", "6", "7", "8" }, 
       Values { "Other", "Unknown", "Direct Mapped", 
          "2-way Set-Associative", "4-way Set-Associative", 
          "Fully Associative", "8-way Set-Associative", 
          "16-way Set-Associative" }, 
       MappingStrings { "MIF.DMTF|System Cache|006.15" }]
   uint16 Associativity;


};