// Copyright (c) 2005 DMTF.  All rights reserved.
   [Deprecated { "CIM_FCPortStatistics" }, 
    Version ( "2.10.0" ), 
    UMLPackagePath ( "CIM::Device::NetworkAdapter" ), 
    Description ( 
       "Note: The use of the FCAdapterEventCounters class is "
       "deprecated because FibreChannelAdapter is deprecated. "
       "FCPortStatistics should be used instead, but it redefines the "
       "level at which data is collected. Therefore, there is no "
       "direct translation of the individual counters between the two "
       "classes. This object describes event counters that were "
       "specific to a FibreChannelAdapter." )]
class CIM_FCAdapterEventCounters : CIM_DeviceStatisticalInformation {

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of Abort sequence "
          "frames received." ), 
       Counter]
   uint64 ABTSFramesReceived;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of Abort sequence "
          "frames sent." ), 
       Counter]
   uint64 ABTSFramesSent;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames busied by "
          "the Fabric." ), 
       Counter]
   uint64 FBSYsReceived;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames busied by "
          "the receiving Node." ), 
       Counter]
   uint64 PBSYsReceived;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames busied by "
          "the Adapter itself." ), 
       Counter]
   uint64 PBSYsSent;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames rejected by "
          "the Fabric." ), 
       Counter]
   uint64 FRJTsReceived;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames rejected by "
          "the receiving Node." ), 
       Counter]
   uint64 PRJTsReceived;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames rejected by "
          "the Adapter itself." ), 
       Counter]
   uint64 PRJTsSent;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of PRLI frames sent "
          "where the response was LS_RJT." ), 
       Counter]
   uint64 PRLIsRejected;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of PRLO frames sent "
          "where the response was LS_RJT." ), 
       Counter]
   uint64 PRLOsRejected;

      [Deprecated { "No value" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of Abort sequence "
          "frames sent where the response was BA_RJT." ), 
       Counter]
   uint64 ABTSFramesRejected;


      [Deprecated { "CIM_FCPortStatistics.ResetSelectedStats()" }, 
       Description ( 
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: Method to reset the Adapter "
          "event counters. The method takes, as input, an integer "
          "that indicates which counter to reset. For this input 0 "
          "indicates all and 1 through 11 indicate a reset of the "
          "individual counters. The method returns 0 if successful, "
          "1 if not supported, and any other value if an error "
          "occurred. A method is specified so that the "
          "instrumentation of the Device, which tabulates the "
          "errors and warnings, can also reset its internal "
          "processing and counters. \n"
          "In a subclass, the set of possible return codes could be "
          "specified, using a ValueMap qualifier on the method. The "
          "strings to which the ValueMap contents are \'translated\' "
          "can also be specified in the subclass as a Values array "
          "qualifier." )]
   uint32 ResetCounter(
         [IN, Description ( "The counter to reset." ), 
          ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", 
             "9", "10", "11" }, 
          Values { "All", "ABTSFramesReceived", "ABTSFramesSent", 
             "FBSYReceived", "PBSYReceived", "PBSYSent", 
             "FRJTReceived", "PRJTReceived", "PRJTSent", 
             "PRLIRejected", "PRLORejected", "ABTSFramesRejected" }]
      uint16 SelectedCounter);

};