// Copyright (c) 2005 DMTF.  All rights reserved.
   [Version ( "2.7.0" ), 
    UMLPackagePath ( "CIM::Network::OSPF" ), 
    Description ( 
       "This class is used to represent OSPF connectivity between two "
       "or more OSPF protocol endpoints." )]
class CIM_OSPFLink : CIM_ConnectivityCollection {

      [Required, Description ( 
          "The type of the OSPF link, see section 1.2 in RFC 2328." ), 
       ValueMap { "2", "3", "4", "5" }, 
       Values { "Point-To-Point", "Point-To-Multipoint", 
          "Broadcast", "NBMA" }]
   uint16 LinkType;

      [Description ( 
          "The time, in seconds, between sending OSPF Hello-packets "
          "over the interface, see section C.3 in RFC 2328." ), 
       Units ( "Seconds" ), 
       MappingStrings { "MIB.IETF|OSPF-MIB.ospfIfHelloInterval" }]
   uint32 HelloInterval;

      [Description ( 
          "After ceasing to hear a router\'s Hello-packets, the "
          "number of seconds before its neighbors declare the "
          "router down, see section C.3 in RFC 2328." ), 
       Units ( "Seconds" ), 
       MappingStrings { "MIB.IETF|OSPF-MIB.ospfIfRtrDeadInterval" }]
   uint32 RouterDeadInterval;

      [Required, Description ( 
          "This parameter indicates whether IP multicast datagrams "
          "should be forwarded over this OSPF link, and if so, how "
          "the forwarding should be done, see section B.2 in RFC "
          "1584." ), 
       ValueMap { "2", "3", "4" }, 
       Values { "Disabled", "Data-link Multicast", 
          "Data-link Unicast" }, 
       MappingStrings { "MIB.IETF|OSPF-MIB.ospfIfMulticastForwarding" }]
   uint16 MulticastForwarding;


};