// Copyright (c) 2005 DMTF. All rights reserved. [Version ( "2.7.0" ), UMLPackagePath ( "CIM::Network::SwitchingBridging" ), Description ( "Statistical information regarding a SwitchPort supporting " "source routing." )] class CIM_SwitchPortSourceRoutingStatistics : CIM_SAPStatisticalInformation { [Description ( "The number of Specifically Routed frames, also referred " "to as Source Routed Frames, that have been received from " "the segment attached to the port." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSpecInFrames" }] uint32 SpecInFrames; [Description ( "The number of Specifically Routed frames, also referred " "to as Source Routed Frames, that the port has " "transmitted on its segment." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSpecOutFrames" }] uint32 SpecOutFrames; [Description ( "The number of All Paths Explorer frames, also referred " "to as All Routes Explorer frames, that have been " "received by the port from its segment." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortApeInFrames" }] uint32 ApeInFrames; [Description ( "The number of all Paths Explorer Frames, also referred " "to as All Routes Explorer frames, that have been " "transmitted by the port on its segment." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortApeOutFrames" }] uint32 ApeOutFrames; [Description ( "The number of spanning tree explorer frames that have " "been received by the port from its segment." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSteInFrames" }] uint32 SteInFrames; [Description ( "The number of spanning tree explorer frames that have " "been transmitted by the port on its segment." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSteOutFrames" }] uint32 SteOutFrames; [Description ( "The number of explorer frames that have been discarded " "by the port because the routing descriptor field " "contained an invalid adjacent segment value." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortSegmentMismatchDiscards" }] uint32 SegmentMismatchDiscards; [Description ( "The number of frames that have been discarded by the " "port because the routing descriptor field contained a " "duplicate segment identifier." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortDuplicateSegmentDiscards" }] uint32 DuplicateSegmentDiscards; [Description ( "The number of explorer frames that have been discarded " "by the port because the Routing Information Field has " "exceeded the maximum route descriptor length." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortHopCountExceedsDiscards" }] uint32 HopCountExceedsDiscards; [Description ( "The number of duplicate LAN IDs or Tree errors. This " "helps in detection of problems in networks containing " "older Source Routing Bridges." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortDupLanIdOrTreeErrors" }] uint32 DupLanIdOrTreeErrors; [Description ( "The number of ARE and STE frames that were discarded " "because the last LAN ID in the routing information field " "did not equal the LAN-in ID. This error can occur in " "implementations which do only a LAN-in ID and Bridge " "Number check instead of a LAN-in ID, Bridge Number, and " "LAN-out ID check before they forward broadcast frames." ), Counter, MappingStrings { "MIB.IETF|SOURCE-ROUTING-MIB.dot1dSrPortLanIdMismatches" }] uint32 LanIdMismatches; };