// Copyright (c) 2009 DMTF. All rights reserved. [Version ( "2.22.0" ), UMLPackagePath ( "CIM::Network::Wireless" ), Description ( "A wireless communication endpoint which, when its associated " "interface device is associated with an IEEE 802.11 wireless " "LAN, may send and receive data frames." )] class CIM_WiFiEndpoint : CIM_LANEndpoint { [Override ( "LANID" ), Description ( "LANID shall contain the Service Set Identifier (SSID) of " "the wireless LAN with which the Endpoint is associated, " "or shall be NULL if the Endpoint is not currently " "associated or this information is not known." ), MappingStrings { "IEEE 802.11-2007 | 7.3.2.1" }] string LANID; [Override ( "ProtocolIFType" ), Description ( "ProtocolIFType\'s enumeration is limited to Wi-Fi and " "reserved values for this subclass of ProtocolEndpoint." ), ValueMap { "1", "71", "225..4095", "4301..32767", "32768.." }, Values { "Other", "IEEE 802.11", "IANA Reserved", "DMTF Reserved", "Vendor Reserved" }] uint16 ProtocolIFType = 71; [Description ( "EncryptionMethod shall specify the encryption method in " "use to protect the confidentiality of data sent and " "received by the WiFiEndpoint.\n" "\t* Unknown (0): shall indicate that the encryption " "method is unknown to the server.\n" "\t* Other (1): shall indicate that the encryption method " "is known to the server but not defined in the list " "below. If EncryptionMethod contains 1, " "OtherEncryptionMethod shall not be NULL and shall not be empty.\n" "\t* WEP (2): shall indicate that the encryption method " "is Wired Equivalency Privacy (WEP). The value of " "EncryptionMethod shall be 2 only if the value of " "AuthenticationMethod is 2 (\"Open System\") or 3 " "(\"Shared Key\").\n" "\t* TKIP (3): shall indicate that the encryption method " "is Temporal Key Integrity Protocol (TKIP). The value of " "EncryptionMethod shall be 3 only if the value of " "AuthenticationMethod is 4 (\"WPA PSK\"), 5 (\"WPA IEEE " "802.1x\"), 6 (\"WPA2 PSK\"), or 7 (\"WPA2 IEEE 802.1x\").\n" "\t* CCMP (4): shall indicate that the encryption method " "is Counter Mode with Cipher Block Chaining Message " "Authentication Code Protocol (CCMP). The value of " "EncryptionMethod shall be 4 only if the value of " "AuthenticationMethod is 4 (\"WPA PSK\"), 5 (\"WPA IEEE " "802.1x\"), 6 (\"WPA2 PSK\"), or 7 (\"WPA2 IEEE 802.1x\").\n" "\t* None (5): shall indicate that no encryption method " "is in use. The value of EncryptionMethod shall be 5 only " "if the value of AuthenticationMethod is 2 (\"Open " "System\") or 3 (\"Shared Key\")." ), ValueMap { "0", "1", "2", "3", "4", "5", "6.." }, Values { "Unknown", "Other", "WEP", "TKIP", "CCMP", "None", "DMTF Reserved" }, MappingStrings { "IEEE 802.11-2007 | 8" }, ModelCorrespondence { "CIM_WiFiEndpoint.AuthenticationMethod", "CIM_WiFiEndpoint.OtherEncryptionMethod" }] uint16 EncryptionMethod; [Description ( "OtherEncryptionMethod shall specify the 802.11 " "encryption method if and only if EncryptionMethod " "contains \"Other\". The format of this string shall be " "vendor-specific." ), ModelCorrespondence { "CIM_WiFiEndpoint.EncryptionMethod" }] string OtherEncryptionMethod; [Description ( "AuthenticationMethod shall specify the method used to " "authenticate the WiFiEndpoint and the network to one another.\n" "\t* Unknown (0): shall indicate that the authentication " "method is unknown to the server.\t* Other (1): shall " "indicate that the authentication method is known to the " "server but not specified in the list below. If " "AuthenticationMethod contains 1, " "OtherAuthenticationMethod shall not be NULL and shall " "not be empty.\n" "\t* Open System (2): shall indicate that the " "authentication method is Open System. " "AuthenticationMethod shall contain 2 only if " "EncryptionMethod contains 2 (\"WEP\").\n" "\t* Shared Key (3): shall indicate that the " "authentication method is Shared Key. " "AuthenticationMethod shall contain 3 only if " "EncryptionMethod contains 2 (\"WEP\").\n" "\t* WPA PSK (4): shall indicate that the authentication " "method is WPA (Wi-Fi Protected Access) PSK (Pre-Shared " "Key). AuthenticationMethod shall contain 4 only if " "EncryptionMethod contains 3 (\"TKIP\") or 4 (\"CCMP\").\n" "\t* WPA IEEE 802.1x (5): shall indicate that the " "authentication method is WPA (Wi-Fi Protected Access) " "IEEE 802.1x. AuthenticationMethod shall contain 5 only " "if EncryptionMethod contains 3 (\"TKIP\") or 4 (\"CCMP\").\n" "\t* WPA2 PSK (6): shall indicate that the authentication " "method is WPA2 (Wi-Fi Protected Access Version 2) PSK " "(Pre-Shared Key). AuthenticationMethod shall contain 6 " "only if EncryptionMethod contains 3 (\"TKIP\") or 4 (\"CCMP\").\n" "\t* WPA2 IEEE 802.1x (7): shall indicate that the " "authentication method is WPA2 (Wi-Fi Protected Access " "Version 2) IEEE 802.1x. AuthenticationMethod shall " "contain 6 only if EncryptionMethod contains 3 (\"TKIP\") " "or 4 (\"CCMP\").\n" "\t* CCKM IEEE 802.1x (8): CCKM (Cisco Centralized Key " "Management with LEAP or EAP-FAST)" ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9.." }, Values { "Unknown", "Other", "Open System", "Shared Key", "WPA PSK", "WPA IEEE 802.1x", "WPA2 PSK", "WPA2 IEEE 802.1x", "CCKM IEEE 802.1x", "DMTF Reserved" }, MappingStrings { "IEEE 802.11-2007 | 8" }, ModelCorrespondence { "CIM_WiFiEndpoint.EncryptionMethod", "CIM_WiFiEndpoint.IEEE8021xAuthenticationProtocol", "CIM_WiFiEndpoint.OtherAuthenticationMethod" }] uint16 AuthenticationMethod; [Description ( "OtherAuthenticationMethod shall specify the 802.11 " "authentication method if and only if " "AuthenticationMethod contains \"Other\". The format of " "this string shall be vendor-specific." ), ModelCorrespondence { "CIM_WiFiEndpoint.AuthenticationMethod" }] string OtherAuthenticationMethod; [Description ( "IEEE8021xAuthenticationProtocol shall contain the EAP " "(Extensible Authentication Protocol) type if and only if " "AuthenticationMethod contains \"WPA IEEE 802.1x\" or " "\"WPA2 IEEE 802.1x\" or \"CCKM IEEE 802.1x\"\n" ".\t* EAP-TLS (0): shall indicate the Transport Layer " "Security EAP type specified in RFC 2716.\n" "\t* EAP-TTLS/MSCHAPv2 (1): shall indicate the Tunneled " "TLS Authentication Protocol EAP type (specified in " "draft-ietf-pppext-eap-ttls) with Microsoft PPP CHAP " "Extensions, Version 2 (MSCHAPv2) as the inner " "authentication method.\n" "\t* PEAPv0/EAP-MSCHAPv2 (2): shall indicate the " "Protected Extensible Authentication Protocol (PEAP) " "Version 0 EAP type (specified in " "draft-kamath-pppext-peapv0), with Microsoft PPP CHAP " "Extensions, Version 2 (MSCHAPv2) as the inner " "authentication method.\n" "\t* PEAPv1/EAP-GTC (3): shall indicate the Protected " "Extensible Authentication Protocol (PEAP) Version 1 EAP " "type (specified in draft-josefsson-pppext-eap-tls-eap), " "with Generic Token Card (GTC) as the inner " "authentication method.\n" "\t* EAP-FAST/MSCHAPv2 (4): shall indicate the Flexible " "Authentication Extensible Authentication Protocol EAP " "type specified in IETF RFC 4851, with Microsoft PPP CHAP " "Extensions, Version 2 (MSCHAPv2) as the inner " "authentication method.\n" "\t* EAP-FAST/GTC (5): shall indicate the Flexible " "Authentication Extensible Authentication Protocol EAP " "type specified in IETF RFC 4851, with Generic Token Card " "(GTC) as the inner authentication method.\n" "\t* EAP-MD5 (6): shall indicate the EAP MD5 " "authentication method, specified in RFC 3748.\n" "\t* EAP-PSK (7): shall indicate the EAP-PSK (Pre-shared " "Key) Protocol specified in RFC 4764.\n" "\t* EAP-SIM (8): shall indicate the Extensible " "Authentication Protocol Method for Global System for " "Mobile Communications (GSM) Subscriber Identity Modules " "(EAP-SIM), specified in RFC 4186.\n" "\t* EAP-AKA (9): shall indicate the Extensible " "Authentication Protocol Method for 3rd Generation " "Authentication and Key Agreement (EAP-AKA) " "authentication method, specified in RFC 4187.\n" "\t* EAP-FAST/TLS (10): shall indicate the Flexible " "Authentication Extensible Authentication Protocol EAP " "type specified in IETF RFC 4851, with TLS as the inner " "authentication method." ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11.." }, Values { "EAP-TLS", "EAP-TTLS/MSCHAPv2", "PEAPv0/EAP-MSCHAPv2", "PEAPv1/EAP-GTC", "EAP-FAST/MSCHAPv2", "EAP-FAST/GTC", "EAP-MD5", "EAP-PSK", "EAP-SIM", "EAP-AKA", "EAP-FAST/TLS", "DMTF Reserved" }, MappingStrings { "RFC4017.IETF", "RFC2716.IETF", "draft-ietf-pppext-eap-ttls.IETF", "draft-kamath-pppext-peapv0.IETF", "draft-josefsson-pppext-eap-tls-eap", "RFC4851.IETF", "RFC3748.IETF", "RFC4764.IETF", "RFC4186.IETF", "RFC4187.IETF" }, ModelCorrespondence { "CIM_WiFiEndpoint.AuthenticationMethod" }] uint16 IEEE8021xAuthenticationProtocol; [Description ( "AccessPointAddress shall contain the MAC address of the " "access point with which the WiFiEndpoint is currently " "associated. If the WiFiEndpoint is not currently " "associated, then AccessPointAddress shall be NULL.The " "MAC address shall be formatted as twelve hexadecimal " "digits (for example, \"010203040506\"), with each pair " "representing one of the six octets of the MAC address in " "\"canonical\" bit order. (Therefore, the Group address " "bit is found in the low order bit of the first character " "of the string.)" )] string AccessPointAddress; [Description ( "BSSType shall indicate the Basic Service Set (BSS) Type " "of the network that corresponds to the instance. A Basic " "Service Set is a set of stations controlled by a single " "coordination function.\n" "\t* Independent: the WiFiEndpoint is associated directly " "to another client station.\n" "\t* Infrastructure: the WiFiEndpoint is associated to a " "network via an access point." ), ValueMap { "0", "2", "3", "4.." }, Values { "Unknown", "Independent", "Infrastructure", "DMTF Reserved" }, MappingStrings { "IEEE 802.11-2007 | 3.16" }] uint16 BSSType; [Description ( "Associated shall indicate whether or not the " "WiFiEndpoint is currently associated to an access point " "or client station." )] boolean Associated; };