// Copyright (c) 2008 DMTF. All rights reserved. [Version ( "2.18.0" ), UMLPackagePath ( "CIM::Physical::Package" ), Description ( "The PhysicalPackage class represents PhysicalElements that " "contain or host other components. Examples are a Rack " "enclosure or an adapter Card." )] class CIM_PhysicalPackage : CIM_PhysicalElement { [Description ( "The RemovalCapabilites property is used to describe the " "conditions under which a PhysicalPackage can be removed. " "Since all PhysicalPackages are not removable, this " "property defaults to 2, \'Not Applicable\'." ), ValueMap { "0", "2", "3", "4" }, Values { "Unknown", "Not Applicable", "Removable when off", "Removable when on or off" }] uint16 RemovalConditions = 2; [Deprecated { "CIM_PhysicalPackage.RemovalConditions" }, Description ( "The use of this property is being deprecated. Instead " "RemovalConditions should be used. The RemovalConditions " "property addresses whether a PhysicalPackage is " "removable with or without power being applied. \n" "A PhysicalPackage is Removable if it is designed to be " "taken in and out of the physical container in which it " "is normally found, without impairing the function of the " "overall packaging. A Package can still be Removable if " "power must be \'off\' in order to perform the removal. " "If power can be \'on\' and the Package removed, then the " "Element is both Removable and HotSwappable. For example, " "an extra battery in a laptop is Removable, as is a disk " "drive Package inserted using SCA connectors. However, " "the latter is also HotSwappable. A laptop\'s display is " "not Removable, nor is a non-redundant power supply. " "Removing these components would impact the function of " "the overall packaging or is impossible due to the tight " "integration of the Package." )] boolean Removable; [Deprecated { "No value" }, Description ( "The use of this property is being deprecated because it " "is redundant with the FRU class and its associations. A " "PhysicalPackage is Replaceable if it is possible to " "replace (FRU or upgrade) the Element with a physically " "different one. For example, some ComputerSystems allow " "the main Processor chip to be upgraded to one of a " "higher clock rating. In this case, the Processor is said " "to be Replaceable. Another example is a power supply " "Package mounted on sliding rails. All Removable packages " "are inherently Replaceable." )] boolean Replaceable; [Deprecated { "CIM_PhysicalPackage.RemovalConditions" }, Description ( "The use of this property is being deprecated. Instead " "RemovalConditions should be used. The RemovalConditions " "property addresses whether a PhysicalPackage is " "removable with or without power being applied. \n" "\n" "A PhysicalPackage is HotSwappable if it is possible to " "replace the Element with a physically different but " "equivalent one while the containing Package has power " "applied to it (ie, is \'on\'). For example, a disk drive " "Package inserted using SCA connectors is both Removable " "and HotSwappable. All HotSwappable packages are " "inherently Removable and Replaceable." )] boolean HotSwappable; [Description ( "The height of the PhysicalPackage in inches." ), Units ( "Inches" ), PUnit ( "inch" )] real32 Height; [Description ( "The depth of the PhysicalPackage in inches." ), Units ( "Inches" ), PUnit ( "inch" )] real32 Depth; [Description ( "The width of the PhysicalPackage in inches." ), Units ( "Inches" ), PUnit ( "inch" )] real32 Width; [Description ( "The weight of the PhysicalPackage in pounds." ), Units ( "Pounds" ), PUnit ( "pound" )] real32 Weight; [Description ( "Enumeration defining the type of the PhysicalPackage. " "Note that this enumeration expands on the list in the " "Entity MIB (the attribute, entPhysicalClass). The " "numeric values are consistent with CIM\'s enum numbering " "guidelines, but are slightly different than the MIB\'s values.\n" "Unknown - indicates that the package type is not known.\n" "Other - The package type does not correspond to an " "existing enumerated value. The value is specified using " "the OtherPackageType property.\n" "The values \"Rack\" through \"Port/Connector\" are " "defined per the Entity-MIB (where the semantics of rack " "are equivalent to the MIB\'s \'stack\' value). The other " "values (for battery, processor, memory, power " "source/generator and storage media package) are self-explanatory.\n" "A value of \"Blade\" should be used when the " "PhysicalPackage contains the operational hardware " "aspects of a ComputerSystem, without the supporting " "mechanicals such as power and cooling. For example, a " "Blade Server includes processor(s) and memory, and " "relies on the containing chassis to supply power and " "cooling. In many respects, a Blade can be considered a " "\"Module/Card\". However, it is tracked differently by " "inventory systems and differs in terms of service " "philosophy. For example, a Blade is intended to be " "hot-plugged into a hosting enclosure without requiring " "additional cabling, and does not require a cover to be " "removed from the enclosure for installation. Similarly, " "a \"Blade Expansion\" has characteristics of a \"Blade\" " "and a \"Module/Card\". However, it is distinct from both " "due to inventory tracking and service philosophy, and " "because of its hardware dependence on a Blade. A Blade " "Expansion must be attached to a Blade prior to inserting " "the resultant assembly into an enclosure." ), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17" }, Values { "Unknown", "Other", "Rack", "Chassis/Frame", "Cross Connect/Backplane", "Container/Frame Slot", "Power Supply", "Fan", "Sensor", "Module/Card", "Port/Connector", "Battery", "Processor", "Memory", "Power Source/Generator", "Storage Media Package (e.g., Disk or Tape Drive)", "Blade", "Blade Expansion" }, MappingStrings { "MIB.IETF|ENTITY-MIB.entPhysicalClass" }, ModelCorrespondence { "CIM_PhysicalPackage.OtherPackageType" }] uint16 PackageType; [Description ( "A string describing the package when the instance\'s " "PackageType property is 1 (\"Other\")." ), ModelCorrespondence { "CIM_PhysicalPackage.PackageType" }] string OtherPackageType; [Description ( "An array of strings that identify the component that is " "compatible with, and can be inserted in a slot that " "reports this string as one of the array element in the " "VendorCompatibilityStrings This allows system " "administrators to determine whether it is appropriateto " "insert a package into a slot \n" "In order to ensure uniqueness within the NameSpace, each " "value defined by the vendor for use in the " "VendorCompatibilityStrings property SHOULD be " "constructed using the following \'preferred\' algorithm: \n" ": \n" "Where and are separated by a colon " "\':\', and where MUST include a copyrighted, " "trademarked or otherwise unique name that is owned by " "the business entity creating/defining the InstanceID, or " "is a registered ID that is assigned to the business " "entity by a recognized global authority (This is similar " "to the _ structure of Schema " "class names.) In addition, to ensure uniqueness " "MUST NOT contain a colon (\':\'). When using this " "algorithm, the first colon to appear in InstanceID MUST " "appear between and . \n" " is chosen by the business entity and SHOULD " "not be re-used to identify different underlying " "(real-world) elements." ), ModelCorrespondence { "CIM_Slot.VendorCompatibilityStrings" }] string VendorCompatibilityStrings[]; [Deprecated { "No value" }, Description ( "This method is being deprecated. A PhysicalPackage " "cannot determine if it is compatible with another " "object. The IsCompatible method verifies whether the " "referenced PhysicalElement may be contained by or " "inserted into the PhysicalPackage. The return value " "should be 0 if the request was successfully executed, 1 " "if the request is not supported and some other value if " "an error occurred. In a subclass, the set of possible " "return codes could be specified, using a ValueMap " "qualifier on the method. The strings to which the " "ValueMap contents are \'translated\' may also be " "specified in the subclass as a Values array qualifier." )] uint32 IsCompatible( [IN, Description ( "The element to check for compatibility with this one." )] CIM_PhysicalElement REF ElementToCheck); };