// Copyright (c) 2008 DMTF. All rights reserved. [Version ( "2.18.0" ), UMLPackagePath ( "CIM::Physical::Connector" ), Description ( "The Slot class represents Connectors into which Packages are " "inserted. For example, a PhysicalPackage that is a DiskDrive " "may be inserted into an SCA \'Slot\'. As another example, a " "Card (subclass of PhysicalPackage) may be inserted into a 16-, " "32-, or 64-bit expansion \'Slot\' on a HostingBoard. PCI or " "PCMCIA Type III Slots are examples of the latter." )] class CIM_Slot : CIM_PhysicalConnector { [Override ( "ConnectorType" ), MappingStrings { "MIF.DMTF|System Slot|005.2" }] uint16 ConnectorType[]; [Override ( "PoweredOn" ), MappingStrings { "MIF.DMTF|System Slot|005.13" }] boolean PoweredOn; [Description ( "Boolean indicating whether the Slot supports hot-plug of " "adapter Cards." )] boolean SupportsHotPlug; [Description ( "Maximum height of an adapter Card that can be inserted " "into the Slot, in inches." ), Units ( "Inches" ), PUnit ( "inch" )] real32 HeightAllowed; [Description ( "Maximum length of an adapter Card that can be inserted " "into the Slot, in inches." ), Units ( "Inches" ), PUnit ( "inch" )] real32 LengthAllowed; [Description ( "Maximum bus width of adapter Cards that can be inserted " "into this Slot, in bits. If the value is \'unknown\', " "enter 0. If the value is other than 8, 16, 32, 64 or " "128, enter 1." ), Units ( "Bits" ), ValueMap { "0", "1", "8", "16", "32", "64", "128" }, MappingStrings { "MIF.DMTF|System Slot|005.3" }, PUnit ( "bit" )] uint16 MaxDataWidth; [Description ( "An array of enumerated integers indicating the Vcc " "voltage supported by this Slot." ), ValueMap { "0", "1", "2", "3" }, Values { "Unknown", "Other", "3.3V", "5V" }, MappingStrings { "MIF.DMTF|System Slot|005.9" }] uint16 VccMixedVoltageSupport[]; [Description ( "An array of enumerated integers indicating the Vpp " "voltage supported by this Slot." ), ValueMap { "0", "1", "2", "3", "4" }, Values { "Unknown", "Other", "3.3V", "5V", "12V" }, MappingStrings { "MIF.DMTF|System Slot|005.10" }] uint16 VppMixedVoltageSupport[]; [Description ( "Maximum thermal dissipation of the Slot in milliwatts." ), Units ( "MilliWatts" ), MappingStrings { "MIF.DMTF|System Slot|005.11" }, PUnit ( "watt * 10^-3" )] uint32 ThermalRating; [Description ( "Boolean indicating that this Slot is physically unique " "and may hold special types of hardware, e.g. a graphics " "processor slot. If set to TRUE, then the property, " "Special PurposeDescription (a string), should specify " "the nature of the uniqueness or purpose of the Slot." ), ModelCorrespondence { "CIM_Slot.PurposeDescription" }] boolean SpecialPurpose; [Description ( "A free-form string describing that this Slot is " "physically unique and may hold special types of " "hardware. This property only has meaning when the " "corresponding boolean property, SpecialPurpose, is set " "to TRUE." ), ModelCorrespondence { "CIM_Slot.SpecialPurpose" }] string PurposeDescription; [Description ( "The Number property indicates the physical slot number, " "which can be used as an index into a system slot table, " "whether or not that slot is physically occupied." ), MappingStrings { "MIF.DMTF|System Slot|005.1" }] uint16 Number; [Deprecated { "CIM_PhysicalElement.PoweredOn" }, Description ( "A boolean indicating whether the Slot is currently " "powered (TRUE) or not (FALSE)." ), MappingStrings { "MIF.DMTF|System Slot|005.13" }] boolean Powered; [Description ( "A boolean indicating whether the switch state of the " "Slot is currently open (TRUE) or closed (FALSE). This " "switch state determines whether the contents of the Slot " "can be hot-plugged." ), MappingStrings { "MIF.DMTF|System Slot|005.15" }] boolean OpenSwitch; [Description ( "Maximum link width of a switching bus type, such as " "Infiniband and PCI Express. The width is expressed in " "number of communication lines, or lanes, between port " "and devices. This property dictates the maximum link " "width, in lanes, of adapter Cards that can be inserted " "into this Slot. If the value is \'unknown\', enter 0." ), ValueMap { "0", "2", "3", "4", "5", "6", "7", "8", "9.." }, Values { "Unknown", "x1", "x2", "x4", "x8", "x12", "x16", "x32", "DMTF Reserved" }] uint16 MaxLinkWidth; [Description ( "An array of strings that identify the components that " "are compatible and can be inserted in a slot. This " "allows vendors to provide clues to the system " "administrators by providing sufficient information to " "request the appropriate hardware that can populate the " "slot. In order to ensure uniqueness within the " "NameSpace, each value defined by the vendor for use in " "the VendorCompatibilityStrings property SHOULD be " "constructed using the following \'preferred\' algorithm: \n" ": \n" "Where and are separated by a colon " "\':\', and where MUST include a copyrighted, " "trademarked or otherwise unique name that is owned by " "the business entity creating/defining the InstanceID, or " "is a registered ID that is assigned to the business " "entity by a recognized global authority (This is similar " "to the _ structure of Schema " "class names.) In addition, to ensure uniqueness " "MUST NOT contain a colon (\':\'). When using this " "algorithm, the first colon to appear in InstanceID MUST " "appear between and . \n" " is chosen by the business entity and SHOULD " "not be re-used to identify different underlying " "(real-world) elements." ), ModelCorrespondence { "CIM_PhysicalPackage.VendorCompatibilityStrings" }] string VendorCompatibilityStrings[]; };