// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_BGPAttributes
// ==================================================================
   [UMLPackagePath ( "CIM::Network::BGP" ), Version ( "2.7.0" ), 
    Description (
       "This class defines the BGP Attributes, that can be used to "
       "affect routing decisions. BGPAttributes are specific to a "
       "given AutonomousSystem that contains it. Hence, the keys of "
       "the AutonomousSystem are propagated to this class.")]
class CIM_BGPAttributes : CIM_LogicalElement {

      [Key, Propagated ( "CIM_AutonomousSystem.CreationClassName" ), 
       Description (
          "The scoping AutonomousSystem's CreationClassName."), 
       MaxLen ( 256 )]
   string SystemCreationClassName;

      [Key, Propagated ( "CIM_AutonomousSystem.Name" ), Description (
          "The scoping AutonomousSystem's Name."), 
       MaxLen ( 256 )]
   string SystemName;

      [Key, Description (
          "This defines the version of the BGP protocol.")]
   string Version;

      [Description (
          "This defines the priority, or preference, of a route, in "
          "order to better compare it with other routes for the same "
          "destination. Higher values indicate a higher preference for "
          "a route."), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgp4PathAttrLocalPref" }]
   uint16 LocalPreference;

      [Description (
          "This attribute is a sequences of the AS numbers through "
          "which routing information carried in this UPDATE message "
          "has passed. The components of this list can be AS_SETs or "
          "AS_SEQUENCEs."), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgp4PathAttrASPath" }]
   string ASPath;

      [Description (
          "This is the set of all elements contained in all specific "
          "paths that are being summarized, so that those attributes "
          "will remain available to the routing decision process.")]
   string AsSet;

      [Description (
          "This attribute defines the IP address of the border router "
          "that should be used as the next hop to the destinations "
          "listed in the UPDATE message."), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgp4PathAttrNextHop" }]
   string NextHop;

      [Description (
          "This defines the next hop to be the IP address of the "
          "border IBGP neighbor.")]
   string NextHopSelf;

      [Description (
          "This is used on external (e.g., inter-AS) links to indicate "
          "which is the preferred entry point into an AS, when that AS "
          "has multiple entry points. Lower MED values have "
          "preference."), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgp4PathAttrMultiExitDisc" }]
   uint32 MED;

      [Description (
          "This defines a group of destinations that share a similar "
          "property. Communities are not restricted to a single AS, "
          "and can span multiple ASs. This attribute is used to "
          "simplify routing policies by basing policies on a logical "
          "value, as opposed to an IP address or an AS number.")]
   uint32 BGPCommunityValue;

      [Description (
          "This property is set to TRUE if there are overlapping "
          "routes, and a less-specific route is selected instead of a "
          "more specific one (e.g., a system propagates an aggregate "
          "that causes loss of information). The value is set to FALSE "
          "if a less-specific route is NOT selected."), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgp4PathAttrAtomicAggregate" 
          }]
   boolean AtomicAggregate;

      [Description (
          "This specifies the AS and IP address of the router that has "
          "generated an aggregate."), 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgp4PathAttrAggregatorAS" }]
   string Aggregator;

      [Description (
          "This is generated by the AS that originates the routing "
          "information. There are three types of origins - IGP, EGP, "
          "and INCOMPLETE. These correspond to whether the information "
          "was learned internally in the AS, externally via an EGP, or "
          "by some other means."), 
       ValueMap { "1", "2", "3" }, 
       Values { "IGP", "EGP", "INCOMPLETE" }, 
       MappingStrings { "MIB.IETF|BGP4-MIB.bgp4PathAttrOrigin" }]
   uint16 Origin;

      [Description (
          "This is the router ID for the ORIGIN attribute.")]
   string OriginatorID;
};