// Copyright (c) 2005 DMTF. All rights reserved. // Add UmlPackagePath // qualifier values to CIM Schema. // ================================================================== // CIM_TimeZone // ================================================================== [UMLPackagePath ( "CIM::System::Time" ), Version ( "2.6.0" ), Description ( "The TimeZone class is a set of properties defining a " "particular time zone. These properties include the concept of " "daylight saving time.")] class CIM_TimeZone : CIM_Setting { [Key, Description ( "Time zone identifier. The Id MAY be expressed in the form " "'area name/city name' (e.g., \"America/New_York\"), or as a " "time zone name (for example, EST or EDT).")] string TimeZoneID; [Key, Description ( "The date and time at which this time zone definition takes " "effect. The value is specified in UTC.")] datetime TimeZoneStartDate; [Description ( "Full name of the 'standard' time zone (e.g., \"U.S. Eastern " "Standard Time\"), suitable for presentation to the user in " "the default locale."), ModelCorrespondence { "CIM_TimeZone.StandardCaption" }] string StandardName; [Description ( "Short name of the 'standard' time zone (e.g., \"EST\"), " "suitable for presentation to the user in the default " "locale. Note that a specific StandardCaption property is " "defined, instead of using the inherited Caption. This is " "done to force consistent property naming for the " "StandardXXX and DaylightXXX properties."), ModelCorrespondence { "CIM_TimeZone.StandardName" }] string StandardCaption; [Description ( "The number of minutes by which this 'standard' time differs " "from UTC. For example, U.S. EST differs from UTC by -5.0 " "hours or -300 minutes, whereas Australia Adelaide Standard " "Time differs by 9.5 hours or 570 minutes."), Units ( "Minutes" )] sint32 StandardOffset; [Description ( "The month in which daylight saving time ends (and " "'standard' time begins). Specify 0 for January, 1 for " "February, and so on."), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11" }, Values { "January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December" }, ModelCorrespondence { "CIM_TimeZone.StandardDay" }] uint8 StandardMonth; [Description ( "There are two different interpretations for this property, " "depending on the value of StandardDayOfWeek. In one case, " "StandardDay defines the day-in-month on which daylight " "saving time ends. This interpretation is used when the " "StandardDayOfWeek is 0. A positive or negative integer is " "specified to indicate whether the StandardDay should be " "calculated from the beginning or the end of the month. For " "example, 5 indicates the fifth day in the StandardMonth and " "-1 indicates the last day in the StandardMonth. \n" "\n" "When StandardDayOfWeek is not 0, StandardDay is the day- " "in-month on which daylight saving time ends, defined in " "conjunction with StandardDayOfWeek. For example, if " "StandardDay is 15 and StandardDayOfWeek is Saturday, then " "daylight saving time ends on the first Saturday on or after " "the 15th day in the StandardMonth (i.e., the third Saturday " "in the month). If StandardDay is 20 and StandardDayOfWeek " "is -Saturday, then this indicates the first Saturday on or " "before the 20th day in the StandardMonth. If StandardDay is " "-1 and StandardDayOfWeek is -Sunday, then this indicates " "the last Sunday in the StandardMonth."), MinValue ( -31 ), MaxValue ( 31 ), ModelCorrespondence { "CIM_TimeZone.StandardDayOfWeek" }] sint8 StandardDay; [Description ( "Positive or negative integer used in conjunction with " "StandardDay to indicate the day of the week on which " "daylight saving time ends (and 'standard' time begins). " "StandardDayOfWeek is set to 0 to indicate an exact day of " "the month, such as March 1. A positive integer " "(representing Sunday, Monday, ..., Saturday) means that the " "day of week is found on or after the specified StandardDay. " "A negative integer (representing -Sunday, -Monday, ..., " "-Saturday) means that the day of week is found on or before " "the StandardDay."), ValueMap { "-7", "-6", "-5", "-4", "-3", "-2", "-1", "0", "1", "2", "3", "4", "5", "6", "7" }, Values { "-Saturday", "-Friday", "-Thursday", "-Wednesday", "-Tuesday", "-Monday", "-Sunday", "ExactDayOfMonth", "Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday" }, ModelCorrespondence { "CIM_TimeZone.StandardDay" }] sint8 StandardDayOfWeek; [Description ( "The time interval after midnight when daylight saving time " "ends. For example, \n" "00000000020000.000000:000 \n" "indicates that daylight saving time ends at two o'clock, " "local time (usually, daylight saving time).")] datetime StandardStartInterval; [Description ( "Full name of the 'daylight' time zone (e.g., \"U.S. Eastern " "Daylight Saving Time\"), suitable for presentation to the " "user in the default locale."), ModelCorrespondence { "CIM_TimeZone.DaylightCaption" }] string DaylightName; [Description ( "Short name of the 'daylight' time zone (e.g., \"EDT\"), " "suitable for presentation to the user in the default " "locale. Note that a specific DaylightCaption property is " "defined, instead of using the inherited Caption. This is " "done to force consistent property naming for the " "StandardXXX and DaylightXXX properties."), ModelCorrespondence { "CIM_TimeZone.DaylightName" }] string DaylightCaption; [Description ( "The number of minutes by which this daylight saving time " "differs from UTC. For example, U.S. EDT differs from UTC by " "-4.0 hours or -240 minutes, whereas Australia Adelaide " "Daylight Time differs by 10.5 hours or 630 minutes."), Units ( "Minutes" )] sint32 DaylightOffset; [Description ( "The month in which daylight saving time starts. Specify 0 " "for January, 1 for February, and so on."), ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11" }, Values { "January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December" }, ModelCorrespondence { "CIM_TimeZone.DaylightDay" }] uint8 DaylightMonth; [Description ( "There are two different interpretations for this property, " "depending on the value of DaylightDayOfWeek. In one case, " "DaylightDay defines the day-in-month on which daylight " "saving time starts. This interpretation is used when the " "DaylightDayOfWeek is 0. A positive or negative integer is " "specified to indicate whether the DaylightDay should be " "calculated from the beginning or the end of the month. For " "example, 5 indicates the fifth day in the DaylightMonth and " "-1 indicates the last day in the DaylightMonth. \n" "\n" "When DaylightDayOfWeek is not 0, DaylightDay is the day- " "in-month on which daylight saving time starts, defined in " "conjunction with DaylightDayOfWeek. For example, if " "DaylightDay is 15 and DaylightDayOfWeek is Saturday, then " "daylight saving time starts on the first Saturday on or " "after the 15th day in the DaylightMonth (i.e., the third " "Saturday in the month). If DaylightDay is 20 and " "DaylightDayOfWeek is -Saturday, then this indicates the " "first Saturday on or before the 20th day in the " "DaylightMonth. If DaylightDay is -1 and DaylightDayOfWeek " "is -Sunday, then this indicates the last Sunday in the " "month."), MinValue ( -31 ), MaxValue ( 31 ), ModelCorrespondence { "CIM_TimeZone.DaylightDayOfWeek" }] sint8 DaylightDay; [Description ( "Positive or negative integer used in conjunction with " "DaylightDay to indicate the day of the week on which " "daylight saving time starts. Set DaylightDayOfWeek to 0 to " "indicate an exact day of month, such as March 1. Positive " "integer (Sunday, Monday, ..., Saturday) means that the day " "of week is found on or after DaylightDay. Negative integer " "(-Sunday, -Monday, ..., -Saturday) means that the day of " "week is found on or before DaylightDay."), ValueMap { "-7", "-6", "-5", "-4", "-3", "-2", "-1", "0", "1", "2", "3", "4", "5", "6", "7" }, Values { "-Saturday", "-Friday", "-Thursday", "-Wednesday", "-Tuesday", "-Monday", "-Sunday", "ExactDayOfMonth", "Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday" }, ModelCorrespondence { "CIM_TimeZone.DaylightDay" }] sint8 DaylightDayOfWeek; [Description ( "The time interval after midnight when daylight saving time " "starts. For example, \n" "00000000020000.000000:000 \n" "indicates that daylight saving time starts at two o'clock, " "local time (usually, standard time).")] datetime DaylightStartInterval; };