// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_PeerGatewayForTunnel
// ==================================================================
   [Association, Version ( "2.8.0" ),
       UMLPackagePath ( "CIM::IPsecPolicy" ), Description (
       "PeerGatewayForTunnel identifies an ordered list of security "
       "gateways to be used in negotiating and constructing a tunnel. "
       "A security gateway is simply a particular instance of "
       "RemoteServiceAccessPoint."), 
    MappingStrings { "IPSP Policy Model.IETF|PeerGatewayForTunnel" }]
class CIM_PeerGatewayForTunnel : CIM_Dependency {

      [Override ( "Antecedent" ), Description (
          "The security gateway for the SA. Note that the absense of "
          "this association indicates that: \n"
          "- When acting as a responder, IKE will accept phase 1 "
          "negotiations with any other security gateway \n"
          "- When acting as an initiator, IKE will use the destination "
          "IP address (of the IP packets which triggered the SARule) "
          "as the IP address of the peer IKE entity."), 
       MappingStrings { "IPSP Policy " 
          "Model.IETF|PeerGatewayForTunnel.Antecedent" }]
   CIM_RemoteServiceAccessPoint REF Antecedent;

      [Override ( "Dependent" ), Description (
          "The IPsecTunnelAction that requires a security gateway."), 
       MappingStrings { "IPSP Policy " 
          "Model.IETF|PeerGatewayForTunnel.Dependent" }]
   CIM_IPsecTunnelAction REF Dependent;

      [Description (
          "SequenceNumber indicates the ordering to be used when "
          "selecting a PeerGateway instance for an IPsecTunnelAction. "
          "Lower values are evaluated first."), 
       MappingStrings { "IPSP Policy Model.IETF|" 
          "PeerGatewayForTunnel.SequenceNumber" }]
   uint16 SequenceNumber;
};