// Copyright (c) 2005 DMTF. All rights reserved. // Add UmlPackagePath // qualifier values to CIM Schema. // ================================================================== // CIM_Card // ================================================================== [Version ( "2.8.0" ), UMLPackagePath ( "CIM::Physical::Package" ), Description ( "The Card class represents a type of physical container that " "can be plugged into another Card or HostingBoard, or is itself " "a HostingBoard/Motherboard in a Chassis. The CIM_Card class " "includes any package capable of carrying signals and providing " "a mounting point for PhysicalComponents, such as Chips, or " "other PhysicalPackages, such as other Cards.")] class CIM_Card : CIM_PhysicalPackage { [Description ( "Boolean indicating that this Card is a Motherboard or, more " "generically, a baseboard in a Chassis.")] boolean HostingBoard; [Description ( "SlotLayout is a free-form string that describes the slot " "positioning, typical usage, restrictions, individual slot " "spacings or any other pertinent information for the slots " "on a Card.")] string SlotLayout; [Description ( "Boolean indicating that at least one daughterboard or " "auxiliary Card is required in order to function properly.")] boolean RequiresDaughterBoard; [Description ( "Boolean indicating that this Card is physically unique from " "other Cards of the same type and therefore requires a " "special Slot. For example, a double-wide Card requires two " "Slots. Another example is where a certain Card may be used " "for the same general function as other Cards but requires a " "special Slot (e.g., extra long), whereas the other Cards " "can be placed in any available Slot. If set to TRUE, then " "the corresponding property, RequirementsDescription, should " "specify the nature of the uniqueness or purpose of the " "Card."), ModelCorrespondence { "CIM_Card.RequirementsDescription" }] boolean SpecialRequirements; [Description ( "A free-form string describing the way(s) in which this Card " "is physically unique from other Cards. This property only " "has meaning when the corresponding boolean property, " "SpecialRequirements, is set to TRUE."), ModelCorrespondence { "CIM_Card.SpecialRequirements" }] string RequirementsDescription; [Description ( "Operating voltages required by the Card."), Units ( "MilliVolts" )] sint16 OperatingVoltages[]; [Description ( "This method manipulates the power to a PhysicalConnector on " "a Card. It is intended to be used by a Card (especially by " "a motherboard - i.e., HostingBoard=TRUE) to turn the power " "on and off for a specific PhysicalConnector located on it. " "For example, in a personal computer, a system slot does not " "know how to turn itself on and off. However, the " "motherboard hosting this slot may have that capability. " "This is important in order to support hot swapping of an " "adapter card in a system slot. The method should return 0 " "if successful, 1 if the request is not supported, and some " "other value if any other error occurred. In a subclass, the " "set of possible return codes could be specified, using a " "ValueMap qualifier on the method. The strings to which the " "ValueMap contents are 'translated' may also be specified in " "the subclass as a Values array qualifier.")] uint32 ConnectorPower( [IN, Description ( "The connector to change the power setting for.")] CIM_PhysicalConnector REF Connector, [IN, Description ( "If TRUE, turn power on for the connector. If FALSE, turn " "power off.")] boolean PoweredOn); };