// Copyright (c) 2006 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// <change cr="CIMCoreCR00863" type="change" Add ChassisPackageType
// value BladeEnclosure. </change>
// ==================================================================
//  CIM_Chassis
// ==================================================================
   [Version ( "2.14.0" ), UMLPackagePath ( "CIM::Physical::Package" ), 
    Description (
       "The Chassis class represents the PhysicalElements that enclose "
       "other Elements and provide definable functionality, such as a "
       "desktop, processing node, UPS, disk or tape storage, or a "
       "combination of these.")]
class CIM_Chassis : CIM_PhysicalFrame {

      [Description (
          "Integer indicating the number of power cords which must be "
          "connected to the Chassis, for all the componentry to "
          "operate.")]
   uint16 NumberOfPowerCords;

      [Description (
          "Current required by the Chassis at 120V. If power is "
          "provided by the Chassis (as in the case of a UPS), this "
          "property may indicate the amperage produced, as a negative "
          "number."), 
       Units ( "Amps at 120 Volts" )]
   sint16 CurrentRequiredOrProduced;

      [Description (
          "Amount of heat generated by the Chassis in BTU/hour."), 
       Units ( "BTU per Hour" )]
   uint16 HeatGeneration;

      [Deprecated { "CIM_Chassis.ChassisPackageType",
          "CIM_Chassis.MultipleSystemSupport" }, Description (
          "The use of this property is deprecated in lieu of "
          "ChassisPackageType. A physical package should not have "
          "multiple form factors. Therefore, this property is being "
          "deprecated in lieu of a single value property. \n"
          "An enumerated, integer-valued array indicating the type of "
          "Chassis."), 
       ValueMap { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10",
          "11", "12", "13", "14", "15", "16", "17", "18", "19", "20",
          "21", "22", "23", "24", "25" }, 
       Values { "Other", "Unknown", "Desktop", "Low Profile Desktop",
          "Pizza Box", "Mini Tower", "Tower", "Portable", "LapTop", 
          // 10                 
          "Notebook", "Hand Held", "Docking Station", "All in One",
          "Sub Notebook", "Space-Saving", "Lunch Box",
          "Main System Chassis", "Expansion Chassis", "SubChassis", 
          // 20                
          "Bus Expansion Chassis", "Peripheral Chassis",
          "Storage Chassis", "Rack Mount Chassis", "Sealed-Case PC",
          "Multi-system Chassis" }, ArrayType ( "Indexed" ), 
       MappingStrings { "MIF.DMTF|Physical Container Global " 
          "Table|004.1" }, 
       ModelCorrespondence { "CIM_Chassis.TypeDescriptions" }]
   uint16 ChassisTypes[];

      [Deprecated { "CIM_Chassis.ChassisTypeDescription" }, 
       Description (
          "The use of this property is deprecated in lieu of a single "
          "value property, ChassisTypeDescription. \n"
          "An array of free-form strings providing more information on "
          "the ChassisTypes array entries. Note, each entry of this "
          "array is related to the entry in ChassisTypes that is "
          "located at the same index."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_Chassis.ChassisTypes" }]
   string TypeDescriptions[];

      [Description (
          "ChassisPackageType indicates the physical form factor for "
          "the type of Chassis. This property may have a value when "
          "the PackageType property contains the value 3 \"Chassis "
          "Frame\". \n"
          "A value of 28 \"Blade Enclosure\" shall indicate the "
          "Chassis is designed to contain one or more "
          "PhysicalPackage(s) of PackageType 16 \"Blade\" or "
          "PackageType 17 \"Blade Expansion\"."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15", "16", "17", "18", "19",
          "20", "21", "22", "23", "24", "25", "26", "27", "28", "..",
          "0x8000..0xFFFF" }, 
       Values { "Unknown", "Other", "SMBIOS Reserved", "Desktop",
          "Low Profile Desktop", "Pizza Box", "Mini Tower", "Tower",
          "Portable", "LapTop", 
          // 10                 
          "Notebook", "Hand Held", "Docking Station", "All in One",
          "Sub Notebook", "Space-Saving", "Lunch Box",
          "Main System Chassis", "Expansion Chassis", "SubChassis", 
          // 20                
          "Bus Expansion Chassis", "Peripheral Chassis",
          "Storage Chassis", "SMBIOS Reseved", "Sealed-Case PC",
          "SMBIOS Reserved", "CompactPCI", "AdvancedTCA",
          "Blade Enclosure", "DMTF Reserved", "Vendor Reserved" }, 
       MappingStrings { "MIF.DMTF|Physical Container Global " 
          "Table|004.1" }, 
       ModelCorrespondence { "CIM_Chassis.ChassisTypeDescription" }]
   uint16 ChassisPackageType;

      [Description (
          "A string providing more information on the "
          "ChassisPackageType."), 
       ModelCorrespondence { "CIM_Chassis.ChassisPackageType" }]
   string ChassisTypeDescription;

      [Description (
          "MultipleSystemSupport indicates whether or not this chassis "
          "supports multiple systems, for example server blades."), 
       ValueMap { "0", "1", "2" }, 
       Values { "Unknown", "True", "False" }]
   uint16 MultipleSystemSupport;

      [Description (
          "RackMountable indicates whether or not the chassis is Rack "
          "Mountable."), 
       ValueMap { "0", "1", "2" }, 
       Values { "Unknown", "True", "False" }]
   uint16 RackMountable;
};