// Copyright 2015 flannel authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// +build !windows

package network

import (
	"fmt"
	"strings"

	log "github.com/golang/glog"

	"time"

	"github.com/coreos/flannel/pkg/ip"
	"github.com/coreos/flannel/subnet"
	"github.com/coreos/go-iptables/iptables"
)

type IPTables interface {
	AppendUnique(table string, chain string, rulespec ...string) error
	Delete(table string, chain string, rulespec ...string) error
	Exists(table string, chain string, rulespec ...string) (bool, error)
}

type IPTablesRule struct {
	table    string
	chain    string
	rulespec []string
}

func MasqRules(ipn ip.IP4Net, lease *subnet.Lease) []IPTablesRule {
	n := ipn.String()
	sn := lease.Subnet.String()
	supports_random_fully := false
	ipt, err := iptables.New()
	if err == nil {
		supports_random_fully = ipt.HasRandomFully()
	}

	if supports_random_fully {
		return []IPTablesRule{
			// This rule makes sure we don't NAT traffic within overlay network (e.g. coming out of docker0)
			{"nat", "POSTROUTING", []string{"-s", n, "-d", n, "-j", "RETURN"}},
			// NAT if it's not multicast traffic
			{"nat", "POSTROUTING", []string{"-s", n, "!", "-d", "224.0.0.0/4", "-j", "MASQUERADE", "--random-fully"}},
			// Prevent performing Masquerade on external traffic which arrives from a Node that owns the container/pod IP address
			{"nat", "POSTROUTING", []string{"!", "-s", n, "-d", sn, "-j", "RETURN"}},
			// Masquerade anything headed towards flannel from the host
			{"nat", "POSTROUTING", []string{"!", "-s", n, "-d", n, "-j", "MASQUERADE", "--random-fully"}},
		}
	} else {
		return []IPTablesRule{
			// This rule makes sure we don't NAT traffic within overlay network (e.g. coming out of docker0)
			{"nat", "POSTROUTING", []string{"-s", n, "-d", n, "-j", "RETURN"}},
			// NAT if it's not multicast traffic
			{"nat", "POSTROUTING", []string{"-s", n, "!", "-d", "224.0.0.0/4", "-j", "MASQUERADE"}},
			// Prevent performing Masquerade on external traffic which arrives from a Node that owns the container/pod IP address
			{"nat", "POSTROUTING", []string{"!", "-s", n, "-d", sn, "-j", "RETURN"}},
			// Masquerade anything headed towards flannel from the host
			{"nat", "POSTROUTING", []string{"!", "-s", n, "-d", n, "-j", "MASQUERADE"}},
		}
	}
}

func ForwardRules(flannelNetwork string) []IPTablesRule {
	return []IPTablesRule{
		// These rules allow traffic to be forwarded if it is to or from the flannel network range.
		{"filter", "FORWARD", []string{"-s", flannelNetwork, "-j", "ACCEPT"}},
		{"filter", "FORWARD", []string{"-d", flannelNetwork, "-j", "ACCEPT"}},
	}
}

func ipTablesRulesExist(ipt IPTables, rules []IPTablesRule) (bool, error) {
	for _, rule := range rules {
		exists, err := ipt.Exists(rule.table, rule.chain, rule.rulespec...)
		if err != nil {
			// this shouldn't ever happen
			return false, fmt.Errorf("failed to check rule existence: %v", err)
		}
		if !exists {
			return false, nil
		}
	}

	return true, nil
}

func SetupAndEnsureIPTables(rules []IPTablesRule, resyncPeriod int) {
	ipt, err := iptables.New()
	if err != nil {
		// if we can't find iptables, give up and return
		log.Errorf("Failed to setup IPTables. iptables binary was not found: %v", err)
		return
	}

	defer func() {
		teardownIPTables(ipt, rules)
	}()

	for {
		// Ensure that all the iptables rules exist every 5 seconds
		if err := ensureIPTables(ipt, rules); err != nil {
			log.Errorf("Failed to ensure iptables rules: %v", err)
		}

		time.Sleep(time.Duration(resyncPeriod) * time.Second)
	}
}

// DeleteIPTables delete specified iptables rules
func DeleteIPTables(rules []IPTablesRule) error {
	ipt, err := iptables.New()
	if err != nil {
		// if we can't find iptables, give up and return
		log.Errorf("Failed to setup IPTables. iptables binary was not found: %v", err)
		return err
	}
	teardownIPTables(ipt, rules)
	return nil
}

func ensureIPTables(ipt IPTables, rules []IPTablesRule) error {
	exists, err := ipTablesRulesExist(ipt, rules)
	if err != nil {
		return fmt.Errorf("Error checking rule existence: %v", err)
	}
	if exists {
		// if all the rules already exist, no need to do anything
		return nil
	}
	// Otherwise, teardown all the rules and set them up again
	// We do this because the order of the rules is important
	log.Info("Some iptables rules are missing; deleting and recreating rules")
	teardownIPTables(ipt, rules)
	if err = setupIPTables(ipt, rules); err != nil {
		return fmt.Errorf("Error setting up rules: %v", err)
	}
	return nil
}

func setupIPTables(ipt IPTables, rules []IPTablesRule) error {
	for _, rule := range rules {
		log.Info("Adding iptables rule: ", strings.Join(rule.rulespec, " "))
		err := ipt.AppendUnique(rule.table, rule.chain, rule.rulespec...)
		if err != nil {
			return fmt.Errorf("failed to insert IPTables rule: %v", err)
		}
	}

	return nil
}

func teardownIPTables(ipt IPTables, rules []IPTablesRule) {
	for _, rule := range rules {
		log.Info("Deleting iptables rule: ", strings.Join(rule.rulespec, " "))
		// We ignore errors here because if there's an error it's almost certainly because the rule
		// doesn't exist, which is fine (we don't need to delete rules that don't exist)
		ipt.Delete(rule.table, rule.chain, rule.rulespec...)
	}
}