ATEN-IPMI-MIB DEFINITIONS ::= BEGIN -- -- Top-level infrastructure of the ATEN CORP. enterprise MIB tree -- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32 FROM SNMPv2-SMI; aten MODULE-IDENTITY LAST-UPDATED "200903201150Z" ORGANIZATION "www.aten.com.tw" CONTACT-INFO "email:shuyufu@aten.com.tw" DESCRIPTION "Top-level infrastructure of the ATEN CORP. enterprise MIB tree" REVISION "200903201150Z" DESCRIPTION "First draft" ::= { enterprises 21317 } -- -- ATEN CORP. enterprise-specific management objects -- ipmi OBJECT IDENTIFIER ::= { aten 1 } event OBJECT IDENTIFIER ::= { ipmi 1 } pef OBJECT IDENTIFIER ::= { event 4 } -- -- MIB Module Object Types -- pefActionSupport OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Actions supported" ::= { pef 2 } sel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of SELs" ::= { ipmi 2 } sensorTable OBJECT-TYPE SYNTAX SEQUENCE OF SensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of sensors. The number of entries is given by the value of ifNumber." ::= { ipmi 3 } sensorEntry OBJECT-TYPE SYNTAX SensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular sensor." INDEX { sensorNumber } ::= { sensorTable 1 } SensorEntry ::= SEQUENCE { sensorNumber Integer32, sensorReading Integer32, sensorPositiveHysteresis Integer32, sensorNegativeHysteresis Integer32, lncThreshold Integer32, lcThreshold Integer32, lnrThreshold Integer32, uncThreshold Integer32, ucThreshold Integer32, unrThreshold Integer32, eventAssertionEnable Integer32, eventDeassertionEnable Integer32, sensorIDString OCTET STRING (SIZE(16)) } sensorNumber OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization." ::= { sensorEntry 1 } sensorReading OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software." ::= { sensorEntry 2 } sensorPositiveHysteresis OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention." ::= { sensorEntry 3 } sensorNegativeHysteresis OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { sensorEntry 4 } lncThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { sensorEntry 5 } lcThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { sensorEntry 6 } lnrThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state)." ::= { sensorEntry 7 } uncThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(6) state if the interface has missing (typically, hardware) components." ::= { sensorEntry 8 } ucThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { sensorEntry 9 } unrThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { sensorEntry 10 } eventAssertionEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { sensorEntry 11 } eventDeassertionEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is deprecated in favour of ifInMulticastPkts and ifInBroadcastPkts." ::= { sensorEntry 12 } sensorIDString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(16)) MAX-ACCESS read-only STATUS current DESCRIPTION "16-byte length field for displaying each available sensors' ID string." ::= { sensorEntry 13 } chassis OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Power status" ::= { ipmi 4 } END