using System.Reflection; using System.Runtime.CompilerServices; using System.Runtime.InteropServices; // General Information about an assembly is controlled through the following // set of attributes. Change these attribute values to modify the information // associated with an assembly. [assembly: AssemblyTitle("ITaskHandler COM Server Project Template")] [assembly: AssemblyDescription("")] [assembly: AssemblyConfiguration("")] [assembly: AssemblyCompany("NetApp, Inc.")] [assembly: AssemblyProduct("ITaskHandler COM Server Project Template")] [assembly: AssemblyCopyright("Copyright 2021 NetApp, Inc.")] [assembly: AssemblyTrademark("Copyright 2021 NetApp, Inc. All rights reserved")] [assembly: AssemblyCulture("")] // Setting ComVisible to false makes the types in this assembly not visible // to COM components. If you need to access a type in this assembly from // COM, set the ComVisible attribute to true on that type. [assembly: ComVisible(false)] // The following GUID is for the ID of the typelib if this project is exposed to COM [assembly: Guid("67e1007c-1925-4c18-b917-2f745f3d6fd2")] // Version information for an assembly consists of the following four values: // // Major Version // Minor Version // Build Number // Revision // // You can specify all the values or you can default the Build and Revision Numbers // by using the '*' as shown below: // [assembly: AssemblyVersion("1.0.*")] [assembly: AssemblyVersion("4.6.0.6715")] [assembly: AssemblyFileVersion("4.6.0.6715")]