#  $Id: //depot/prod/test/Rsierranevada/storage/hdd/NADQ_SEA/NDATE/SUPPORT_SCRIPTS/rules/NADQ02_FC_CFtakeover_giveback#1 $
#Structure = Error being searched for;Reason for Failure;severity;Should this be include for check or not
#Severity 1: Exits from all remaining test cases from the filer
#Severity 2: Fatal, if mentioned in the test scripts it stops executing
#            rest of the test case
#Severity 3: Fail - step failed
#Severity 4: Warning
#####################################################
fcadmin and disklist verification not Successful (Step 6-5);disks does not appear to smae;3;y
cluster is not enabled successfully;Some problem in seetiing up the cluster;2;y
Spare disks on both the filers are not same;drives on both the nodes are not same after giveback;3;y
Failed disks on both the filers are not same;drives on both the nodes are not same after giveback;3;y
Offline disks on both the filers are not same;drives on both the nodes are not same after giveback;3;y
fcadmin and disklist verification not Successful (Step 17-3);;disks does not appear to smae;3;y
Cluster must be licensed and the system rebooted before using this command;Problem in setting up the status or filer is not in takeover prompt;2;y
No Drive is Attached in any of the shelf;No disk is attached to the filer;2;y
fci.device.resetting:debug;Resetting disk device;3;y
fci.channel.resetting:debug;Resetting all devices on channel;3;y
fci.adapter.reset:debug;Resetting Fibre Channel adapter;3;y
cf.disk.ResvFail:CRITICAL;disks has reservation conflict;3;y