json-c  0.15
json-c Documentation

json-c

  1. Overview and Build Status
  2. Building on Unix
  3. CMake options
  4. Testing
  5. Building with `vcpkg`
  6. Linking to libjson-c
  7. Using json-c

JSON-C - A JSON implementation in C

Build Status

Test Status

JSON-C implements a reference counting object model that allows you to easily construct JSON objects in C, output them as JSON formatted strings and parse JSON formatted strings back into the C representation of JSON objects. It aims to conform to RFC 7159.

Building on Unix with git, gcc and cmake

Home page for json-c: https://github.com/json-c/json-c/wiki

Prerequisites:

To generate docs you'll also need:

If you are on a relatively modern system, you'll likely be able to install the prerequisites using your OS's packaging system.

Install using apt (e.g. Ubuntu 16.04.2 LTS)

sudo apt install git
sudo apt install cmake
sudo apt install doxygen  # optional
sudo apt install valgrind # optional

Build instructions:

json-c GitHub repo: https://github.com/json-c/json-c 

$ git clone https://github.com/json-c/json-c.git
$ mkdir json-c-build
$ cd json-c-build
$ cmake ../json-c   # See CMake section below for custom arguments

Note: it's also possible to put your build directory inside the json-c source directory, or even not use a separate build directory at all, but certain things might not work quite right (notably, make distcheck)

Then: 

$ make
$ make test
$ make USE_VALGRIND=0 test   # optionally skip using valgrind
$ make install

Generating documentation with Doxygen:

The libray documentation can be generated directly from the source codes using Doxygen tool: 

# in build directory
make doc
google-chrome doc/html/index.html

CMake Options

The json-c library is built with CMake, which can take a few options.

Variable Type Description
CMAKE_INSTALL_PREFIX String The install location.
CMAKE_BUILD_TYPE String Defaults to "debug".
BUILD_SHARED_LIBS Bool The default build generates a dynamic (dll/so) library. Set this to OFF to create a static library only.
BUILD_STATIC_LIBS Bool The default build generates a static (lib/a) library. Set this to OFF to create a shared library only.
DISABLE_STATIC_FPIC Bool The default builds position independent code. Set this to OFF to create a shared library only.
DISABLE_BSYMBOLIC Bool Disable use of -Bsymbolic-functions.
DISABLE_THREAD_LOCAL_STORAGE Bool Disable use of Thread-Local Storage (HAVE___THREAD).
DISABLE_WERROR Bool Disable use of -Werror.
ENABLE_RDRAND Bool Enable RDRAND Hardware RNG Hash Seed.
ENABLE_THREADING Bool Enable partial threading support.
OVERRIDE_GET_RANDOM_SEED String A block of code to use instead of the default implementation of json_c_get_random_seed(), e.g. on embedded platforms where not even the fallback to time() works. Must be a single line.

Pass these options as -D on CMake's command-line. 

# build a static library only
cmake -DBUILD_SHARED_LIBS=OFF ..

Building with partial threading support

Although json-c does not support fully multi-threaded access to object trees, it has some code to help make its use in threaded programs a bit safer. Currently, this is limited to using atomic operations for json_object_get() and json_object_put().

Since this may have a performance impact, of at least 3x slower according to https://stackoverflow.com/a/11609063, it is disabled by default. You may turn it on by adjusting your cmake command with: -DENABLE_THREADING=ON

Separately, the default hash function used for object field keys, lh_char_hash, uses a compare-and-swap operation to ensure the random seed is only generated once. Because this is a one-time operation, it is always compiled in when the compare-and-swap operation is available.

cmake-configure wrapper script

For those familiar with the old autoconf/autogen.sh/configure method, there is a cmake-configure wrapper script to ease the transition to cmake. 

mkdir build
cd build
../cmake-configure --prefix=/some/install/path
make

cmake-configure can take a few options.

options Description
prefix=PREFIX install architecture-independent files in PREFIX
enable-threading Enable code to support partly multi-threaded use
enable-rdrand Enable RDRAND Hardware RNG Hash Seed generation on supported x86/x64 platforms.
enable-shared build shared libraries [default=yes]
enable-static build static libraries [default=yes]
disable-Bsymbolic Avoid linking with -Bsymbolic-function
disable-werror Avoid treating compiler warnings as fatal errors

Testing:

By default, if valgrind is available running tests uses it. That can slow the tests down considerably, so to disable it use: 

export USE_VALGRIND=0

To run tests a separate build directory is recommended: 

mkdir build-test
cd build-test
# VALGRIND=1 causes -DVALGRIND=1 to be passed when compiling code
# which uses slightly slower, but valgrind-safe code.
VALGRIND=1 cmake ..
make

make test
# By default, if valgrind is available running tests uses it.
make USE_VALGRIND=0 test   # optionally skip using valgrind

If a test fails, check Testing/Temporary/LastTest.log, tests/testSubDir/${testname}/${testname}.vg.out, and other similar files. If there is insufficient output try: 

VERBOSE=1 make test

or 

JSONC_TEST_TRACE=1 make test

and check the log files again.

Building on Unix and Windows with vcpkg

You can download and install JSON-C using the vcpkg dependency manager: 

git clone https://github.com/Microsoft/vcpkg.git
cd vcpkg
./bootstrap-vcpkg.sh
./vcpkg integrate install
vcpkg install json-c

The JSON-C port in vcpkg is kept up to date by Microsoft team members and community contributors. If the version is out of date, please create an issue or pull request on the vcpkg repository.

Linking to libjson-c

If your system has pkgconfig, then you can just add this to your makefile: 

CFLAGS += $(shell pkg-config --cflags json-c)
LDFLAGS += $(shell pkg-config --libs json-c)

Without pkgconfig, you would do something like this: 

JSON_C_DIR=/path/to/json_c/install
CFLAGS += -I$(JSON_C_DIR)/include/json-c
LDFLAGS+= -L$(JSON_C_DIR)/lib -ljson-c

Using json-c

To use json-c you can either include json.h, or preferrably, one of the following more specific header files:

For a full list of headers see files.html

The primary type in json-c is json_object. It describes a reference counted tree of json objects which are created by either parsing text with a json_tokener (i.e. json_tokener_parse_ex()), or by creating (with json_object_new_object(), json_object_new_int(), etc...) and adding (with json_object_object_add(), json_object_array_add(), etc...) them individually. Typically, every object in the tree will have one reference, from it's parent. When you are done with the tree of objects, you call json_object_put() on just the root object to free it, which recurses down through any child objects calling json_object_put() on each one of those in turn.

You can get a reference to a single child (json_object_object_get() or json_object_array_get_idx()) and use that object as long as its parent is valid. If you need a child object to live longer than its parent, you can increment the child's refcount (json_object_get()) to allow it to survive the parent being freed or it being removed from its parent (json_object_object_del() or json_object_array_del_idx())

When parsing text, the json_tokener object is independent from the json_object that it returns. It can be allocated (json_tokener_new()) used ones or multiple times (json_tokener_parse_ex(), and freed (json_tokener_free()) while the json_object objects live on.

A json_object tree can be serialized back into a string with json_object_to_json_string_ext(). The string that is returned is only valid until the next "to_json_string" call on that same object. Also, it is freed when the json_object is freed.

Generated on Sun Jul 26 2020 15:11:19 for json-c by   doxygen 1.8.2